Taps
DRILL/TAP 10-32 HEX DRIVE
XDT1032
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 5/8".
- Overall length: 2.61".
$33.675
HAND TAP - HIGH SPEED/BOTTOM 1/2"-13
X1213BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.5125
HAND TAP - HIGH SPEED/PLUG 1/2"-13
X1213PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$33.797
HAND TAP - HIGH SPEED/TAPER 1/2"-13
X1213TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$33.797
HAND TAP - HIGH SPEED/BOTTOM 1/2"-20
X1220BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/PLUG 1/2"-20
X1220PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/TAPER 1/2"-20
X1220TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/TAPER #12-24
X1224TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 12-24.
- Number of flutes: 4.
- Length of thread: 15/16".
- Overall length: 2-3/8".
$14.7908
HAND TAP - HIGH SPEED/BOTTOM 1/4"-20
X1420BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/PLUG 1/4"-20
X1420PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/TAPER 1/4"-20
X1420TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$15.5975
HAND TAP - HIGH SPEED/BOTTOM 1/4"-28
X1428BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/4-28.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/PLUG 1/4"-28
X1428PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/4-28.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/TAPER 1/4"-28
X1428TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/4-28.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
TAP-HIGH SPEED, PIPE-TAPER 1/8" NPT
X18MPTTAP
- Taper pipe tap
- Made from high quality high speed steel.
- For the tapping of pipe and pipe fittings.
- Designed to produce threads where mated parts are not required to withstand high fluid or gas pressures.
- Use where the use of a sealing compound or tape is acceptable to produce a leakproof thread.
- Chamfer length: 1-2 pitches.
- Size: 1/8-27 NPT.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$68.7389
HAND TAP - HIGH SPEED/BOTTOM 3/4"-10
X3410BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/PLUG 3/4"-10
X3410PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/TAPER 3/4"-10
X3410TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/BOTTOM 3/4"-16
X3416BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 3/4-16.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/PLUG 3/4"-16
X3416PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 3/4-16.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/BOTTOM 3/8"-16
X3816BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 3/8-16.
- Number of flutes: 4.
- Length of thread: 1-1/4".
- Overall length: 2-15/16".
$19.5651
HAND TAP - HIGH SPEED/PLUG 3/8"-16
X3816PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 3/8-16.
- Number of flutes: 4.
- Length of thread: 1-1/4".
- Overall length: 2-15/16".
$19.5651
HAND TAP - HIGH SPEED/TAPER 3/8"-16
X3816TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 3/8-16.
- Number of flutes: 4.
- Length of thread: 1-1/4".
- Overall length: 2-15/16".
$19.5651
HAND TAP - HIGH SPEED/BOTTOM 3/8"-24
X3824BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 3/8-24.
- Number of flutes: 4.
- Length of thread: 1-1/4".
- Overall length: 2-15/16".
$19.5651
HAND TAP - HIGH SPEED/PLUG 3/8"-24
X3824PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 3/8-24.
- Number of flutes: 4.
- Length of thread: 1-1/4".
- Overall length: 2-15/16".
$19.5651
Refine
21 More
16 More
7 More