Taps
HAND TAP - HIGH SPEED/TAPER #8-32
X832TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$14.4925
HAND TAP - HIGH SPEED/BOTTOM 7/16"-12
X9612BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/TAPER 9/16"-12
X9612TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/BOTTOM 9/16"-18
X9618BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/TAPER 9/16"-18
X9618TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
DRILL/TAP 10-32 HEX DRIVE
XDT1032
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 5/8".
- Overall length: 2.61".
$33.675
DRILL/TAP 1/4-20 HEX DRIVE
XDT1420
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 3/4".
- Overall length: 2.89".
$33.675
DRILL/TAP 8-32 HEX DRIVE
XDT832
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 1/2".
- Overall length: 2.45".
$33.675
HAND TAP - HIGH SPEED/BOTTOM #10-24
X1024BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #10-24
X1024PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/TAPER #10-24
X1024TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$14.4925
HAND TAP - HIGH SPEED/BOTTOM #10-32
X1032BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #10-32
X1032PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/TAPER #10-32
X1032TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$14.4925
HAND TAP - HIGH SPEED/BOTTOM 1/2"-13
X1213BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$33.797
HAND TAP - HIGH SPEED/PLUG 1/2"-13
X1213PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$33.797
HAND TAP - HIGH SPEED/TAPER 1/2"-13
X1213TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/2-13.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$33.797
HAND TAP - HIGH SPEED/BOTTOM 1/2"-20
X1220BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/PLUG 1/2"-20
X1220PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/TAPER 1/2"-20
X1220TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/2-20.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-3/8".
$35.616
HAND TAP - HIGH SPEED/TAPER #12-24
X1224TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 12-24.
- Number of flutes: 4.
- Length of thread: 15/16".
- Overall length: 2-3/8".
$14.7908
HAND TAP - HIGH SPEED/BOTTOM 1/4"-20
X1420BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/PLUG 1/4"-20
X1420PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
HAND TAP - HIGH SPEED/TAPER 1/4"-20
X1420TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/4-20.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$15.5975
HAND TAP - HIGH SPEED/BOTTOM 1/4"-28
X1428BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 1/4-28.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$14.8341
Refine
7 More
16 More
21 More