Nuts
WING NUT UNC ZINC 1/4"-20
1420WN
- A nut with wings which allow the part to be manually turned.
- Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
- Made from cold forged steel.
- Zinc plated.
- Size: 1/4"-20.
$40.26
$0.4026
$0.4026
WING NUT UNC ZINC 3/8"-16
3816WN
- A nut with wings which allow the part to be manually turned.
- Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
- Made from cold forged steel.
- Zinc plated.
- Size: 3/8"-16.
$44.40
$0.444
$0.444
WING NUT UNC ZINC 5/16"-18
5618WN
- A nut with wings which allow the part to be manually turned.
- Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
- Made from cold forged steel.
- Zinc plated.
- Size: 5/16"-18.
$38.06
$0.3806
$0.3806
HEX NUT UNF ZINC 1"-14 GR 8
8N114
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1"-14.
- Yellow zinc plated.
$40.344
$4.0344
$4.0344
HEX NUT UNC ZINC 1/2"-13 GR 8
8N1213
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/2"-13.
- Yellow zinc plated.
$28.64
$0.5728
$0.5728
HEX NUT UNF ZINC 1/2"-20 GR 8
8N1220
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/2"-20.
- Yellow zinc plated.
$35.385
$0.7077
$0.7077
HEX NUT UNC ZINC 1/4"-20 GR 8
8N1420
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/4"-20.
- Yellow zinc plated.
$28.20
$0.282
$0.282
HEX NUT UNF ZINC 1/4"-28 GR 8
8N1428
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/4"-28.
- Yellow zinc plated.
$27.00
$0.27
$0.27
HEX NUT UNC ZINC 1"-8 GR 8
8N18
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1"-8.
- Yellow zinc plated.
$36.876
$3.6876
$3.6876
HEX NUT UNC ZINC 3/4"-10 GR 8
8N3410
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/4"-10.
- Yellow zinc plated.
$38.01
$1.5204
$1.5204
HEX NUT UNF ZINC 3/4"-16 GR 8
8N3416
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/4"-16.
- Yellow zinc plated.
$46.525
$1.861
$1.861
HEX NUT UNC ZINC 3/8"-16 GR 8
8N3816
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/8"-16.
- Yellow zinc plated.
$33.36
$0.3336
$0.3336
HEX NUT UNF ZINC 3/8"-24 GR 8
8N3824
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/8"-24.
- Yellow zinc plated.
$23.70
$0.237
$0.237
HEX NUT UNC ZINC 5/16"-18 GR 8
8N5618
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/16"-18.
- Yellow zinc plated.
$27.60
$0.276
$0.276
HEX NUT UNF ZINC 5/16"-24 GR 8
8N5624
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/16"-24.
- Yellow zinc plated.
$17.40
$0.174
$0.174
HEX NUT UNC ZINC 5/8"-11 GR 8
8N5811
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/8"-11.
- Yellow zinc plated.
$24.535
$0.9814
$0.9814
HEX NUT UNC ZINC 7/16"-14 GR 8
8N7614
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 7/16"-14.
- Yellow zinc plated.
$28.84
$0.5768
$0.5768
HEX NUT UNF ZINC 5/8"-18 GR 8
8N5818
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/8"-18.
- Yellow zinc plated.
$30.5375
$1.2215
$1.2215
HEX NUT UNF ZINC 7/16"-20 GR 8
8N7620
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 7/16"-20.
- Yellow zinc plated.
$22.05
$0.441
$0.441
HEX NUT UNC ZINC 7/8"-9 GR 8
8N789
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 7/8"-9.
- Yellow zinc plated.
$25.344
$2.5344
$2.5344
HEX NUT UNF ZINC 7/8"-14 GR 8
8N7814
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 7/8"-14.
- Yellow zinc plated.
$15.789
$1.5789
$1.5789
HEX NUT UNF ZINC 9/16"-18 GR 8
8N9618
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 9/16"-18.
- Yellow zinc plated.
$12.92
$0.5168
$0.5168
LOCK NUT STOVER UNF ZINC 1"-14 GRADE C
8SLN114
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1"-14.
$31.20
$3.12
$3.12
LOCK NUT STOVER UNC ZINC 1/2"-13 GRADE C
8SLN1213
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1/2"-13.
$26.32
$0.5264
$0.5264
LOCK NUT STOVER UNF ZINC 1/2"-20 GRADE C
8SLN1220
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1/2"-20.
$56.00
$1.12
$1.12