Taps
HAND TAP - HIGH SPEED/BOTTOM 7/16"-12
X9612BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/TAPER 9/16"-12
X9612TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/BOTTOM 9/16"-18
X9618BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/TAPER 9/16"-18
X9618TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
TAP TAPER M8-1.25
XM8X1.25TTAP
- Taper tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Size: M8-1.25
$26.7374
TAP BOTTOMING M10-1.50
XM10X1.5BTAP
- Bottom tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Threads close to the bottom of blind holes.
- Size: M10-1.50
$46.8113
TAP-HIGH SPEED, PIPE-TAPER 1/4" NPT
X14MPTTAP
- Taper pipe tap
- Made from high quality high speed steel.
- For the tapping of pipe and pipe fittings.
- Designed to produce threads where mated parts are not required to withstand high fluid or gas pressures.
- Use where the use of a sealing compound or tape is acceptable to produce a leakproof thread.
- Chamfer length: 1-2 pitches.
- Size: 1/4-18 NPT.
- Number of flutes: 4.
- Length of thread: 1-1/6".
- Overall length: 2-7/16".
$74.1449
HAND TAP - HIGH SPEED/BOTTOM #4-40
X440BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 4-40.
- Number of flutes: 3.
- Length of thread: 9/16".
- Overall length: 1-7/8".
$17.8419
HAND TAP - HIGH SPEED/TAPER #4-40
X440TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 4-40.
- Number of flutes: 3.
- Length of thread: 9/16".
- Overall length: 1-7/8".
$17.8419
HAND TAP - HIGH SPEED/BOTTOM #10-24
X1024BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #10-24
X1024PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/TAPER #10-24
X1024TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$14.4925
HAND TAP - HIGH SPEED/BOTTOM #10-32
X1032BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #10-32
X1032PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
DRILL/TAP 10-24 HEX DRIVE
XDT1024
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 5/8".
- Overall length: 2.61".
$33.675
DRILL/TAP 1/2-13 HEX DRIVE
XDT1213
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 11/32" hex shank.
- Length of thread: 1-3/8".
- Overall length: 4.07".
$51.275
DRILL/TAP 1/4-20 HEX DRIVE
XDT1420
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 3/4".
- Overall length: 2.89".
$33.675
DRILL/TAP 3/8-16 HEX DRIVE
XDT3816
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 11/32" hex shank.
- Length of thread: 1-1/16".
- Overall length: 3.45".
$41.86
DRILL/TAP 5/16-18 HEX DRIVE
XDT5618
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 15/16".
- Overall length: 3.2".
$36.8514
DRILL/TAP 8-32 HEX DRIVE
XDT832
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 1/2".
- Overall length: 2.45".
$33.675
HAND TAP - HIGH SPEED/TAPER #10-32
X1032TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 10-32.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$14.4925
Refine
21 More
16 More
7 More