Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1-1/4"
1024X114
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1-1/4".
$28.20
$0.282
$0.282
CUP-POINT SOCKET SET-SCREW #10-24 X 1/2"
102412CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 1/2"
$32.64
$0.3264
$0.3264
CUP-POINT SOCKET SET-SCREW #10-24 X 1/4"
102414CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 1/4"
$30.96
$0.3096
$0.3096
MACHINE SCREW PHIL OVAL HD #10-24 X 1-1/2" STAINLESS
1024X112OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 1-1/2".
$34.32
$0.3432
$0.3432
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1-1/2"
1024X112
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1-1/2".
$39.60
$0.396
$0.396
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1"
1024X1
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1".
$21.60
$0.216
$0.216
CUP-POINT SOCKET SET-SCREW #10-24 X 5/8"
102458CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 5/8"
$36.74
$0.3674
$0.3674
CUP-POINT SOCKET SET-SCREW #10-24 X 3/8"
102438CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 3/8"
$27.96
$0.2796
$0.2796
CUP-POINT SOCKET SET-SCREW #10-24 X 5/16"
102456CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 5/16"
$31.32
$0.3132
$0.3132
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1/2"
1024X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1/2".
$19.20
$0.192
$0.192
MACHINE SCREW PHIL OVAL HD #10-24 X 1-1/4" STAINLESS
1024X114OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 1-1/4".
$34.56
$0.3456
$0.3456
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1/2" THREAD CUTTING
1024X12HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 1/2".
$27.60
$0.276
$0.276
MACHINE SCREW PHIL OVAL HD #10-24 X 1/2" STAINLESS
1024X12OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 1/2".
$28.35
$0.2835
$0.2835
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1/4"
1024X14
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1/4".
$14.60
$0.146
$0.146
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1" THREAD CUTTING
1024X1HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 1".
$24.60
$0.246
$0.246
MACHINE SCREW PHIL OVAL HD #10-24 X 1" STAINLESS
1024X1OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 1".
$25.20
$0.252
$0.252
MACHINE SCREW PHILLIPS PAN HD #10-24 X 2-1/2
1024X212
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 2-1/2".
$30.60
$0.306
$0.306
MACHINE SCREW PHILLIPS PAN HD #10-24 X 3"
1024X3
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 3".
$33.11
$0.3311
$0.3311
MACHINE SCREW PHIL OVAL HD #10-24 X 2" STAINLESS
1024X2OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 2".
$73.36
$0.7336
$0.7336
MACHINE SCREW PHILLIPS PAN HD #10-24 X 2"
1024X2
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 2".
$43.50
$0.435
$0.435
MACHINE SCREW PHILLIPS PAN HD #10-24 X 3/4"
1024X34
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 3/4".
$19.20
$0.192
$0.192
MACHINE SCREW HEX HEAD TYP-F #10-24 X 3/4" THREAD CUTTING
1024X34HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 3/4".
$43.40
$0.434
$0.434
MACHINE SCREW PHIL OVAL HD #10-24 X 3/4" STAINLESS
1024X34OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 10-24 diameter.
- Length of 3/4".
$29.40
$0.294
$0.294
MACHINE SCREW PHILLIPS PAN HD #10-24 X 3/8"
1024X38
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 3/8".
$18.80
$0.188
$0.188
Refine
10 More
2 More
1 More
49 More
45 More