Fasteners

Industrial Fasteners for Construction, Fabrication & Maintenance

Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.

Bolts, Screws & Threaded Rod

Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.

Nuts, Washers & Locking Hardware

Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.

Anchors & Threaded Inserts

Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.

Pins, Retaining Rings & Rivets

For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.

Specialty Fasteners & Hardware

Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.

Value Propositions

Broad selection of standard and metric fasteners for every application
Suitable for industrial, fleet, and maintenance use
Structural, mechanical, and anchoring solutions for diverse environments
Consistent sizing for efficient repair and replacement
Supports fabrication, installation, and equipment service

Display items per page

TEK SCREW PHILLIPS PAN HEAD #10 X 1/2"

10X12PT

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Phillips pan head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 10
Length: 1/2"

$15.60
$0.156

+ -

TEK SCREW PHILLIPS PAN HEAD #10 X 1/2" , BLACK

10X12PT2

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Rockwell hardness C52-58.
Phillips pan head.
Steel zinc black.
Diameter: 10
Length: 1/2"

$30.60
$0.306

+ -

TEK SCREW HEX WASHER HD #10 X 1/2"

10X12T

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Hex washer head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 10
Length: 1/2"

$18.60
$0.186

+ -

HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 16, CL 8.8

10X16M

Hex head cap screw with metric thread pitch made from medium carbon steel.
Heat treated.
Tensile strength: 800 Newtons/mm² minimum.
Zinc plated.
Metric coarse threads.
Diameter: M10-1.50.
Length: 16 mm.

$24.31
$0.4862

+ -

WOOD SCREW PHILLIPS FLAT HEAD #10 X 1"

10X1FPWS

A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
Will produce a mating thread when assembled into wood or other resilient materials.
Flat head Phillips.
Zinc plated steel.
Diameter: 10
Length: 1"

$42.60
$0.426

+ -

TEK SCREW HEX WASHER HD #10 X 1/2" BLACK

10X12T2

A tapping screw with spaced threads and a drill point which drills its own hole
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
Hex washer head
Black oxide

$30.84
$0.3084

+ -

SHEET METAL SCREW HEX WASH HD #10 X 1"

10X1H

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
The washer and head are formed together as one piece. (Hex washer slotted head)
Increased bearing area reduces likelihood of crushing mating surfaces.
Zinc plated steel.
Screw diameter 10
Screw length 1 inch

$19.65
$0.1965

+ -

SHEET METAL SCREW HEX WASH HD #10 X 1" , BLACK

10X1H2

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
The washer and head are formed together as one piece. (hex washer slotted)
Increased bearing area reduces likelihood of crushing mating surfaces.
Black zinc finish
Screw diameter: 10
Screw length 1 inch

$44.20
$0.442

+ -

SHEET METAL SCREW OVAL PHIL HD #10 X 1" STAINLESS

10X1OP

A thread forming stainless tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
A countersunk head with a rounded top surface and a cone-shaped bearing surface.
Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
The countersunk surface nests into mating countersunk application sites.
Oval head, phillips drive
Screw diameter 10
Screw length 1 inch

$44.10
$0.441

+ -

SHEET METAL SCREW PHIL PAN HD #10 X 1"

10X1P

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Phillips Pan Head
For general applications.
Can be substituted in most applications for round, truss or binding screws.
Steel zinc plated.
Diameter: 10
Length: 1"

$18.30
$0.183

+ -

SHEET METAL SCREW PHIL PAN HD #10 X 1" STAINLESS

10X1PSS

A thread forming stainless tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
For general applications.
Can be substituted in most applications for round, truss or binding screws.
Pan head, phillips drive
Screw diameter 10
Screw length 1 inch

$42.20
$0.422

+ -

TEK SCREW PHILLIPS PAN HEAD #10 X 1"

10X1PT

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Phillips pan head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 10
Length: 1"

$19.50
$0.195

+ -

TEK SCREW PHILLIPS PAN HEAD #10 X 1" , BLACK

10X1PT2

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Rockwell hardness C52-58.
Phillips pan head.
Steel zinc black.
Diameter: 10
Length: 1"

$38.06
$0.3806

+ -

SHEET METAL SCREW QUAD DR PAN HD #10 X 1" BLACK

10X1RH2

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.

$24.72
$0.2472

+ -

SHEET METAL SCREW QUAD DR PAN HD #10 X 1" TAN HEAD

10X1RH11

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.

$32.48
$0.3248

+ -

SHEET METAL SCREW QUAD DR PAN HD #10 X 1" WHITE

10X1RH3

A thread forming tapping screw with spaced threads and a gimlet point.
Can be substituted in most applications for round, truss or binding screws.
For self starting in thin metal or resin-filled plywood.
Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
Zinc plated steel, with heads painted white.
Great for RV applications.
Square drive
Screw diameter 10
Screw length is 1 inch

$24.72
$0.2472

+ -

TEK SCREW HEX WASHER HD #10 X 1"

10X1T

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Hex washer head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 10
Length: 1"

$23.81
$0.2381

+ -

HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 20, CL 8.8

10X20M

Hex head cap screw with metric thread pitch made from medium carbon steel.
Heat treated.
Tensile strength: 800 Newtons/mm² minimum.
Zinc plated.
Metric coarse threads.
Diameter: M10-1.50.
Length: 20 mm.

$19.995
$0.3999

+ -

WOOD SCREW PHILLIPS FLAT HEAD #10 X 2-1/2"

10X212FPWS

A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
Will produce a mating thread when assembled into wood or other resilient materials.
Flat head Phillips.
Zinc plated steel.
Diameter: 10
Length: 2-1/2"

$43.68
$0.4368

+ -

SHEET METAL SCREW OVAL PHIL HD #10 X 2-1/2" STAINLESS

10X212OP

A thread forming stainless tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
A countersunk head with a rounded top surface and a cone-shaped bearing surface.
Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
The countersunk surface nests into mating countersunk application sites.
Oval head, phillips drive
Screw diameter 10
Screw length 2-1/2 inches

$36.30
$0.363

+ -

TEK SCREW QUAD DR PAN HD #10 X 1" TAN HEAD

10X1RHT11

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.

$26.76
$0.2676

+ -

TEK SCRW QUAD-DRIVE PAN HD #10 X 1" WHITE

10X1RHT3

A tapping screw with spaced threads and a drill point which drills its own hole
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
Round washer head, phillips drive
Zinc plated steel with white painted heads

$33.62
$0.3362

+ -