Screws
TEK SCREW HEX WASHER HD #12 X 1", STAINLESS
X12X1TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
$85.89
$0.8589
$0.8589
METAL SCREW PHILLIPS FLAT HEAD #12 X 3/4"
X12X34FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 3/4 inch
$24.48
$0.2448
$0.2448
TEK SCREW FLAT HEAD PHILLIPS #12 X 2" STAINLESS
X12X2FHPTS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Flat head phillips head
- Stainless Steel
$72.00
$0.72
$0.72
TEK SCREW HEX WASHER HD #12 X 3/4", STAINLESS
X12X34TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
$60.00
$0.60
$0.60
TEK SCREW PHILLIPS PAN HEAD #12 X 3/4"
X12X34PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$33.00
$0.33
$0.33
TEK SCREW HEX WASHER HD #12 X 3"
X12X3T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 3"
$47.80
$0.478
$0.478
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 1-1/2" STAINLESS
X1420X112FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$75.74
$0.7574
$0.7574
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 1-1/2" THREAD CUTTING
X1420X112HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 1-1/2".
$65.36
$0.6536
$0.6536
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/2" BLACK
X1420X112P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$234.00
$2.34
$2.34
Refine
2 More
6 More