Screws
METAL SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
X12X112FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 1-1/2 inches
$26.04
$0.2604
$0.2604
HEX LAG SCREW ZINC 1/2" X 1-1/2"
X12X112LS
- A full-bodied bolt with a hex head, spaced threads and a gimlet point.
- For use in wood in non-corosive environments.
- Tensile strength 60,000 psi minimum
$177.00
$3.54
$3.54
TEK SCREW PHILLIPS PAN HEAD #12 X 1-1/2"
X12X112PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$62.32
$0.6232
$0.6232
TEK SCREW HEX WASHER HD #12 X 1-1/4"
X12X114T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
$26.40
$0.264
$0.264
METAL SCREW PHILLIPS FLAT HEAD #12 X 1"
X12X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 1 inch
$22.35
$0.2235
$0.2235
TEK SCREW PHILLIPS PAN HEAD #12 X 1"
X12X1PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
$72.00
$0.72
$0.72
Refine
2 More
6 More