Screws
SHEET METAL SCREW OVAL PHIL HD #10 X 1-1/4" STAINLESS
10X114OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 10
- Screw length 1-1/4 inches
$29.16
$0.2916
$0.2916
SHEET METAL SCREW PHIL PAN HD #10 X 1-1/4"
10X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1-1/4"
$18.30
$0.183
$0.183
SHEET METAL SCREW PHIL PAN HD #10 X 1-1/4" STAINLESS
10X114PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 10
- Screw length 1-1/4 inches
$31.32
$0.3132
$0.3132
TEK SCREW HEX WASHER HD #10 X 1-1/4"
10X114T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/4"
$28.50
$0.285
$0.285
SHEET METAL SCREW HEX WASH HD #10-16 X 1/2"
10X12H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 10
- Screw length 1/2 inch
$16.20
$0.162
$0.162
SHEET METAL SCREW HEX WASH HD #10 X 1/2" , BLACK
10X12H2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (hex washer slotted)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Black zinc finish
- Screw diameter: 10
- Screw length 1/2 inch
$35.64
$0.3564
$0.3564
SHEET METAL SCREW OVAL PHIL HD #10 X 1/2" STAINLESS
10X12OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 10
- Screw length 1/2 inch
$24.00
$0.24
$0.24
SHEET METAL SCREW PHIL PAN HD #10 X 1/2"
10X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1/2"
$16.65
$0.1665
$0.1665
SHEET METAL SCREW PHIL PAN HD #10 X 1/2" STAINLESS
10X12PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 10
- Screw length 1/2 inch
$27.00
$0.27
$0.27
TEK SCREW PHILLIPS PAN HEAD #10 X 1/2"
10X12PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$15.60
$0.156
$0.156
TEK SCREW PHILLIPS PAN HEAD #10 X 1/2" , BLACK
10X12PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 10
- Length: 1/2"
$30.60
$0.306
$0.306
TEK SCREW HEX WASHER HD #10 X 1/2"
10X12T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$18.60
$0.186
$0.186
WOOD SCREW PHILLIPS FLAT HEAD #10 X 1"
10X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 10
- Length: 1"
$42.60
$0.426
$0.426
TEK SCREW HEX WASHER HD #10 X 1/2" BLACK
10X12T2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Hex washer head
- Black oxide
$30.84
$0.3084
$0.3084
SHEET METAL SCREW HEX WASH HD #10 X 1"
10X1H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
$19.65
$0.1965
$0.1965
SHEET METAL SCREW HEX WASH HD #10 X 1" , BLACK
10X1H2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (hex washer slotted)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Black zinc finish
- Screw diameter: 10
- Screw length 1 inch
$44.20
$0.442
$0.442
SHEET METAL SCREW OVAL PHIL HD #10 X 1" STAINLESS
10X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 10
- Screw length 1 inch
$44.10
$0.441
$0.441
SHEET METAL SCREW PHIL PAN HD #10 X 1"
10X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1"
$18.30
$0.183
$0.183
SHEET METAL SCREW PHIL PAN HD #10 X 1" STAINLESS
10X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 10
- Screw length 1 inch
$42.20
$0.422
$0.422
TEK SCREW PHILLIPS PAN HEAD #10 X 1"
10X1PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1"
$19.50
$0.195
$0.195
TEK SCREW PHILLIPS PAN HEAD #10 X 1" , BLACK
10X1PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 10
- Length: 1"
$38.06
$0.3806
$0.3806
SHEET METAL SCREW QUAD DR PAN HD #10 X 1" BLACK
10X1RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$24.72
$0.2472
$0.2472
SHEET METAL SCREW QUAD DR PAN HD #10 X 1" TAN HEAD
10X1RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$32.48
$0.3248
$0.3248
Refine
6 More
2 More