Screws
SHEET METAL SCREW PHIL FLAT HD #10 X 3/4" STAINLESS
X10X34FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 10 X 3/4"
$20.55
$0.2055
$0.2055
METAL SCREW SQ DRIVE FLAT HEAD #10 X 3/4"
X10X34FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 3/4 inch
$19.00
$0.19
$0.19
METAL SCREW PAN HEAD PHILLIPS #10 X 3/4" BLACK OXIDE
X10X34P2
- Sheet Metal Screw
- Phillips Drive
- Pan Head
- Black Oxide
- #10 x 3/4"
$42.00
$0.42
$0.42
TEK SCREW PHILLIPS PAN HEAD #10 X 3/4", STAINLESS
X10X34PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
- Rockwell hardness C55 minimum.
- Diameter: 10
- Length: 3/4"
$40.00
$0.40
$0.40
SHEET METAL SCREW SQ DR PAN HD #10 X 3/4"
X10X34RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 3/4"
$24.90
$0.249
$0.249
TEK SCREW SQUARE DRIVE PAN HD #10 X 3/4"
X10X34RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 3/4"
$16.50
$0.165
$0.165
TEK SCREW HEX WASHER HD #10 X 3/4", STAINLESS
X10X34TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Grade 410 Stainless
$39.60
$0.396
$0.396
SHEET METAL SCREW SQ DR PAN HD #10 X 3"
X10X3RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 3"
$39.82
$0.3982
$0.3982
DRYWALL SCREW - FINE #10 X 4"
X10X4DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 10
- Length 4 inches
- Bugle head, phillips drive
$42.24
$0.4224
$0.4224
METAL SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
X12X112FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 1-1/2 inches
$26.04
$0.2604
$0.2604
HEX LAG SCREW ZINC 1/2" X 1-1/2"
X12X112LS
- A full-bodied bolt with a hex head, spaced threads and a gimlet point.
- For use in wood in non-corosive environments.
- Tensile strength 60,000 psi minimum
$177.00
$3.54
$3.54
Refine
6 More
2 More