Screws
METAL SCREW PHILLIPS FLAT HEAD #8 X 1/2"
X8X12FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1/2 inch
$11.80
$0.118
$0.118
METAL SCREW PHILLIPS PAN HEAD #8 X 1/2" BLACK
X8X12P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$49.90
$0.499
$0.499
SHEET METAL SCREW SQ DR PAN HD #8 X 1/2"
X8X12RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1/2 inch
$16.95
$0.1695
$0.1695
METAL SCREW PHILLIPS FLAT HEAD #8 X 1"
X8X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$22.50
$0.225
$0.225
SHEET METAL SCREW PHIL FLAT HD #8 X 1" STAINLESS
X8X1FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #8-32 X 1"
$24.00
$0.24
$0.24
TEK SCREW FLAT HEAD PHILLIPS #8 X 1"
X8X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$64.56
$0.6456
$0.6456
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1"
X8X1FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$16.80
$0.168
$0.168
METAL SCREW SQ DRIVE FLAT HEAD #8 X 2-1/2"
X8X212FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 2-1/2 inches
$39.05
$0.3905
$0.3905
SHEET METAL SCREW RND WASHER PAN HD #8 X 2-1/2", QUAD DRIVE, BRONZE
X8X212RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$27.00
$0.27
$0.27
WOOD SCREW PHILLIPS FLAT HEAD #8 X 1-1/2"
8X112FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 8
- Length: 1-1/2"
$45.00
$0.45
$0.45
SHEET METAL SCREW HEX WASH HD #8 X 1-1/2"
8X112H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/2 inches
$21.15
$0.2115
$0.2115
SHEET METAL SCREW PHIL PAN HD #8 X 1-1/2"
8X112P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 1-1/2"
$17.40
$0.174
$0.174
SHEET METAL SCREW OVAL PHIL HD #8 X 1-1/2" STAINLESS
8X112OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 1-1/2 inches
$27.72
$0.2772
$0.2772
Refine
2 More
6 More