Screws
TEK SCREW HEX WASHER HEAD #8 X 1" BLACK
8X1T2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Hex washer head
- Black oxide
$34.80
$0.348
$0.348
DRYWALL SCREW-FINE #8 X 2-1/2"
8X212DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 8
- Length 2-1/2 inches
- Bugle head, phillips drive
$18.30
$0.183
$0.183
SHEET METAL SCREW HEX WASH HD #8 X 2-1/2"
8X212H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 2-1/2 inches
$31.92
$0.3192
$0.3192
WOOD SCREW PHILLIPS FLAT HEAD #8 X 2"
8X2FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 8
- Length: 2"
$27.84
$0.2784
$0.2784
SHEET METAL SCREW HEX WASH HD #8 X 3/4"
8X34H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 3/4 inch
$18.80
$0.188
$0.188
SHEET METAL SCREW HEX WASH HD #8 X 2"
8X2H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 2 inches
$20.25
$0.2025
$0.2025
SHEET METAL SCREW QUAD DR PAN HD #8 X 2" BLACK
8X2RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$29.40
$0.294
$0.294
WOOD SCREW PHILLIPS FLAT HEAD #8 X 3/4"
8X34FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 8
- Length: 3/4"
$19.20
$0.192
$0.192
SHEET METAL SCREW OVAL PHIL HD #8 X 2" STAINLESS
8X2OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 2 inches
$33.00
$0.33
$0.33
SHEET METAL SCREW QUAD DR PAN HD #8 X 2" WHITE
8X2RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 8
- Screw length is 2 inches
$32.88
$0.3288
$0.3288
SHEET METAL SCREW PHIL PAN HD #8 X 2"
8X2P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2"
$22.95
$0.2295
$0.2295
SHEET METAL SCREW PHIL PAN HD #8 X 3/4"
8X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 3/4"
$15.40
$0.154
$0.154
SHEET METAL SCREW PHIL PAN HD #8 X 3/4" STAINLESS
8X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 8
- Screw length 3/4 inch
$27.15
$0.2715
$0.2715
TEK SCREW PHILLIPS PAN HEAD #8 X 3/4"
8X34PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$19.00
$0.19
$0.19
TEK SCREW PHILLIPS PAN HEAD #8 X 3/4" , BLACK
8X34PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 8
- Length: 3/4"
$40.84
$0.4084
$0.4084
TEK SCRW QUAD-DRIVE PAN HD #8 X 3/4" BLACK
8X34RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$24.90
$0.249
$0.249
SHEET METAL SCREW QUAD DR PAN HD #8 X 3/4" WHITE
8X34RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 8
- Screw length is 3/4 inch
$22.20
$0.222
$0.222
SHEET METAL SCREW QUAD DR PAN HD #8 X 3/4" TAN HEAD
8X34RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$23.06
$0.2306
$0.2306
TEK SCREW QUAD DR PAN HD #8 X 3/4" TAN HEAD
8X34RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$24.14
$0.2414
$0.2414
SHEET METAL SCREW HEX WASH HD #20 X 1-1/2"
20X112H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 5/16
- Screw length 1-1/2 inches
$85.47
$0.8547
$0.8547
MACHINE SCREW PHILLIPS PAN HD #12-24 X 1"
1224X1
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 12-24 diameter.
- Length of 1".
$33.60
$0.336
$0.336
MACHINE SCREW PHILLIPS PAN HD #12-24 X 1/2"
1224X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 12-24 diameter.
- Length of 1/2".
$26.04
$0.2604
$0.2604
Refine
2 More
6 More