Screws
TEK SCREW SQUARE DRIVE PAN HD ZINC #8 X 3/4"
X8X34RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$24.90
$0.249
$0.249
SHEET METAL SCREW RND WASHER PAN HD #8 X 3/4", QUAD DRIVE, BRONZE
X8X34RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$21.60
$0.216
$0.216
SHEET METAL SCREW SQ DR PAN HEAD #8 X 3"
X8X3RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 3 inches
$124.53
$1.2453
$1.2453
SHEET METAL SCREW RND WASHER PAN HD #8 X3", QUAD DRIVE, BRONZE
X8X3RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$190.45
$1.9045
$1.9045
SHEET METAL SCREW RND WASHER #8 X 9/16", ZINC, PHILLIPS
X8X96RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Steel zinc plated.
- Diameter: 8
- Length: 9/16"
$13.80
$0.138
$0.138
METAL SCREW PHILLIPS FLAT HEAD #6 X 1-1/4"
X6X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 1-1/4 inches
$14.00
$0.14
$0.14
METAL SCREW PHILLIPS FLAT HEAD #6 X 1/2"
X6X12FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 1/2 inch
$8.00
$0.08
$0.08
METAL SCREW FLAT HEAD SQUARE DRIVE #6 X 1/2"
X6X12FHSD
- FLAT HEAD
- SQUARE DRIVE
- #6 DIAMETER
- LENGTH 1/2"
- ZINC FINISH
$19.80
$0.198
$0.198
SHEET METAL SCREW PHIL FLAT HD #6 X 1/2" STAINLESS
X6X12FHPS
- Machine Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #10-24 X 1/2"
$18.75
$0.1875
$0.1875
Refine
2 More
6 More