Screws
WOOD SCREW PHILLIPS FLAT HEAD #6 X 1-1/2"
6X112FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 6
- Length: 1-1/2"
$19.20
$0.192
$0.192
SHEET METAL SCREW OVAL PHIL HD #6 X 1-1/2" STAINLESS
6X112OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 1-1/2 inches
$26.85
$0.2685
$0.2685
DRYWALL SCREW-FINE #6 X 1-1/4"
6X114DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1-1/4 inches
- Bugle head, phillips drive
$13.60
$0.136
$0.136
SHEET METAL SCREW OVAL PHIL HD #6 X 1-1/4" STAINLESS
6X114OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 1-1/4 inches
$23.85
$0.2385
$0.2385
SHEET METAL SCREW PHIL PAN HD #6 X 1-1/4"
6X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 1-1/4"
$40.90
$0.409
$0.409
SHEET METAL SCREW OVAL PHIL HD #6 X 1/2" STAINLESS
6X12OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 1/2 inch
$16.20
$0.162
$0.162
SHEET METAL SCREW PHIL PAN HD #6 X 1/2"
6X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 1/2"
$9.00
$0.09
$0.09
SHEET METAL SCREW PHIL PAN HD #6 X 1/2" STAINLESS
6X12PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 6
- Screw length 1/2 inch
$22.50
$0.225
$0.225
SHEET METAL SCREW PHIL PAN HD #6 X 1/4"
6X14P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 1/4"
$8.40
$0.084
$0.084
DRYWALL SCREW-FINE #6 X 1-5/8"
6X158DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1-5/8 inches
- Bugle head, phillips drive
$15.92
$0.1592
$0.1592
DRYWALL SCREW-FINE #6 X 1"
6X1DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1 inch
- Bugle head, phillips drive
$9.00
$0.09
$0.09
WOOD SCREW PHILLIPS FLAT HEAD #6 X 1"
6X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 6
- Length: 1"
$18.80
$0.188
$0.188
SHEET METAL SCREW OVAL PHIL HD #6 X 1" STAINLESS
6X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 1 inch
$21.30
$0.213
$0.213
SHEET METAL SCREW PHIL PAN HD #6 X 1"
6X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 1"
$13.60
$0.136
$0.136
DRYWALL SCREW-FINE #6 X 2-1/4"
6X214DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 2-1/4 inches
- Bugle head, phillips drive
$18.00
$0.18
$0.18
DRYWALL SCREW-FINE #6 X 2"
6X2DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 2 inches
- Bugle head, phillips drive
$15.00
$0.15
$0.15
WOOD SCREW PHILLIPS FLAT HEAD #6 X 3/4"
6X34FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 6
- Length: 3/4"
$15.80
$0.158
$0.158
SHEET METAL SCREW HEX WASH HD #6 X 3/4"
6X34H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/4 inch
$15.40
$0.154
$0.154
SHEET METAL SCREW PHIL PAN HD #6 X 3/4"
6X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/4"
$13.80
$0.138
$0.138
SHEET METAL SCREW PHIL PAN HD #6 X 3/4" STAINLESS
6X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 6
- Screw length 3/4 inch
$17.55
$0.1755
$0.1755
SHEET METAL SCREW HEX WASH HD #6 X 3/8"
6X38H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/8 inch
$10.40
$0.104
$0.104
SHEET METAL SCREW OVAL PHIL HD #6 X 3/8" STAINLESS
6X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 3/8 inch
$15.00
$0.15
$0.15
SHEET METAL SCREW PHIL PAN HD #6 X 3/8"
6X38P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/8"
$6.40
$0.064
$0.064
Refine
2 More
6 More