Screws
METAL SCREW PHILLIPS FLAT HEAD #8 X 1"
X8X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$22.50
$0.225
$0.225
TEK SCREW FLAT HEAD PHILLIPS #8 X 1"
X8X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$64.56
$0.6456
$0.6456
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1"
X8X1FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$16.80
$0.168
$0.168
TEK SCREW PHILLIPS PAN HEAD #8 X 1", STAINLESS
X8X1PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
$34.44
$0.3444
$0.3444
PHIL.RND.WSHR.HD.SMS (ZINC) PHILLIPS ZINC
X8X1RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Steel zinc plated.
- Diameter: 8
- Length: 1"
$16.80
$0.168
$0.168
TEK SCREW RND WASHER HD PHILLIPS #8 X 1"
X8X1RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1"
$20.85
$0.2085
$0.2085
TEK SCREW HEX WASHER HD #8 X 1" STAINLESS
X8X1TS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$40.00
$0.40
$0.40
METAL SCREW SQ DRIVE FLAT HEAD #8 X 2-1/2"
X8X212FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 2-1/2 inches
$39.05
$0.3905
$0.3905
METAL SCREW PHILLIPS FLAT HEAD #8 X 2"
X8X2FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 2 inches
$22.80
$0.228
$0.228
METAL SCREW SQ DRIVE FLAT HEAD #8 X 2"
X8X2FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 2 inches
$27.72
$0.2772
$0.2772
TEK SCREW PHILLIPS PAN HEAD #8 X 2"
X8X2PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$64.40
$0.644
$0.644
TEK SCREW PHILLIPS PAN HEAD #8 X 2" BLACK
X8X2PT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel Black Oxide
$99.54
$0.9954
$0.9954
SHEET METAL SCREW PHIL FLAT HD #8 X 3/4" STAINLESS
X8X34FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #8-32 X 3/4"
$30.24
$0.3024
$0.3024
Refine
2 More
6 More