Screws
DRYWALL SCREW-FINE #6 X 1-5/8"
6X158DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1-5/8 inches
- Bugle head, phillips drive
$15.92
$0.1592
$0.1592
DRYWALL SCREW-FINE #6 X 1"
6X1DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1 inch
- Bugle head, phillips drive
$9.00
$0.09
$0.09
WOOD SCREW PHILLIPS FLAT HEAD #6 X 1"
6X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 6
- Length: 1"
$18.80
$0.188
$0.188
SHEET METAL SCREW OVAL PHIL HD #6 X 1" STAINLESS
6X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 1 inch
$21.30
$0.213
$0.213
SHEET METAL SCREW PHIL PAN HD #6 X 1"
6X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 1"
$13.60
$0.136
$0.136
SHEET METAL SCREW PHIL PAN HD #6 X 1" STAINLESS
6X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 6
- Screw length 1 inch.
$32.40
$0.324
$0.324
DRYWALL SCREW-FINE #6 X 2-1/4"
6X214DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 2-1/4 inches
- Bugle head, phillips drive
$18.00
$0.18
$0.18
DRYWALL SCREW-FINE #6 X 2"
6X2DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 2 inches
- Bugle head, phillips drive
$15.00
$0.15
$0.15
WOOD SCREW PHILLIPS FLAT HEAD #6 X 3/4"
6X34FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 6
- Length: 3/4"
$15.80
$0.158
$0.158
SHEET METAL SCREW HEX WASH HD #6 X 3/4"
6X34H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/4 inch
$15.40
$0.154
$0.154
SHEET METAL SCREW OVAL PHIL HD #6 X 3/4" STAINLESS
6X34OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 3/4 inch
$15.45
$0.1545
$0.1545
SHEET METAL SCREW PHIL PAN HD #6 X 3/4"
6X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/4"
$13.80
$0.138
$0.138
SHEET METAL SCREW PHIL PAN HD #6 X 3/4" STAINLESS
6X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 6
- Screw length 3/4 inch
$17.55
$0.1755
$0.1755
SHEET METAL SCREW HEX WASH HD #6 X 3/8"
6X38H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/8 inch
$10.40
$0.104
$0.104
SHEET METAL SCREW OVAL PHIL HD #6 X 3/8" STAINLESS
6X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 3/8 inch
$15.00
$0.15
$0.15
SHEET METAL SCREW PHIL PAN HD #6 X 3/8"
6X38P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/8"
$6.40
$0.064
$0.064
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1"
832X1
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 8-32 diameter.
- Length of 1".
$22.50
$0.225
$0.225
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1-1/2"
832X112
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 8-32 diameter.
- Length of 1-1/2".
$24.45
$0.2445
$0.2445
MACHINE SCREW PHIL OVAL HD #8-32 X 1-1/2" STAINLESS
832X112OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 8-32 diameter.
- Length of 1-1/2".
$28.56
$0.2856
$0.2856
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1-1/4"
832X114
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 8-32 diameter.
- Length of 1-1/4".
$25.80
$0.258
$0.258
MACHINE SCREW PHIL OVAL HD #8-32 X 1-1/4" STAINLESS
832X114OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 8-32 diameter.
- Length of 1-1/4".
$25.35
$0.2535
$0.2535
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1/2"
832X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 8-32 diameter.
- Length of 1/2".
$17.00
$0.17
$0.17
MACHINE SCREW HEX HEAD TYP-F #8-32 X 1/2" THREAD CUTTING
832X12HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 8-32 diameter.
- Length of 1/2".
$15.15
$0.1515
$0.1515
MACHINE SCREW PHIL OVAL HD #8-32 X 1/2" STAINLESS
832X12OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 8-32 diameter.
- Length of 1/2".
$16.50
$0.165
$0.165
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1/4"
832X14
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 8-32 diameter.
- Length of 1/4".
$11.20
$0.112
$0.112
Refine
6 More
2 More