Pins
ROLL PIN - PLAIN FINISH 1/2" X 1-1/2"
X12112RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/2
- Length is 1-1/2 inch
$132.08
$1.3208
$1.3208
ROLL PIN - PLAIN FINISH 1/4" X 1-3/4"
X14134RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1-3/4 inch
$46.795
$0.9359
$0.9359
ROLL PIN - PLAIN FINISH 1/4" X 2-1/4"
X14214RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 2-1/4 inches
$38.025
$1.521
$1.521
ROLL PIN - PLAIN FINISH 1/4" X 3"
X143RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 3 inchs
$37.49
$1.4996
$1.4996
HITCH PIN - ZINC .062 DIAMETER, 1-9/16A" LENGTH
HP218
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-9/16 inches.
$17.875
$0.3575
$0.3575
HITCH PIN - ZINC .162 DIAMETER 2-3/16 LENGTH
HP205
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin
- Steel, Zinc plated
- Used in conjuction with clevis pins and also trailer receivers
- Wire diameter .162
- Length of 2-3/16 inches
$1.4339