Pins
SNAP PIN 3/8 X 2 1/2 SQUARE HANDLE DOUBLE WIRE
XB28-06
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 3/8" diameter
- 2-1/2" grip
$39.798
$3.9798
$3.9798
SNAP PIN 5/16 X 2 1/2 DOUBLE WIRE
XB28-02
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 5/16" diameter
- 2-1/2" grip
$33.192
$3.3192
$3.3192
SNAP PIN 1/4 X 2 1/2 DOUBLE WIRE HANDLE
XB28-07
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/2" grip
$26.449
$2.6449
$2.6449
SNAP PIN DOUBLE WIRE HANDLE 5/16 X 1 3/4
XB28-08
- Shank Length: 2"
- Effective Length: 1-3/4"
- Round Two Wire Snap Pin
- Diameter: 5/16"
- Low Carbon Steel
- Zinc Clear
$31.304
$3.1304
$3.1304
LYNCH PIN - TAB LOCK SING 1/4" X 2-1/2", SQUARE BAIL
XB28-144
- Tab-lock style single wire handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/2" grip
$84.525
$3.381
$3.381
ROLL PIN - PLAIN FINISH 1/2" X 2"
X122RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/2
- Length is 2 inchs
$80.405
$1.6081
$1.6081
ROLL PIN - PLAIN FINISH 1/4" X 1-1/4"
X14114RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1-1/4 inch
$39.08
$0.7816
$0.7816
HITCH PIN - ZINC .093 DIAMETER, 1-5/8" LENGTH
HP203
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 1-5/8 inches.
$10.28
$0.4112
$0.4112
HITCH PIN - ZINC .177 DIAMETER, 3-1/4 LENGTH
HP206
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-1/4 inches.
$33.7425
$1.3497
$1.3497
HITCH PIN - ZINC .093 DIAMETER, 2-5/16" LENGTH
HP207
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 2-5/16 inches.
$11.40
$0.456
$0.456
HITCH PIN - ZINC .177 DIAMETER, 3-3/4 LENGTH
HP208
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-3/4 inches.
$34.335
$1.3734
$1.3734
HITCH PIN - ZINC .08 DIAMETER, 1-3/16 LENGTH
HP213
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.08.
- Length of 1-3/16 inches.
$17.055
$0.3411
$0.3411
HITCH PIN - ZINC .125 DIAMETER, 1-15/16" LENGTH
HP216
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 1-15/16 inches.
$13.86
$0.5544
$0.5544
HITCH PIN - ZINC .148 DIAMETER, 3-5/16 LENGTH
HP209
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.148.
- Length of 3-5/16 inches.
$22.3825
$0.8953
$0.8953
HITCH PIN - ZINC .243 DIAMETER, 4 LENGTH
HP219
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.243.
- Length of 4 inches.
$25.896
$2.5896
$2.5896
HITCH PIN - ZINC .062 DIAMETER, 1-5/16 LENGTH
HP222
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-5/16 inches.
$17.34
$0.3468
$0.3468
HITCH PIN - ZINC .042 DIAMETER, 1 LENGTH
HP223
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.042.
- Length of 1 inches.
$17.56
$0.3512
$0.3512
HITCH PIN - ZINC .125 DIAMETER, 2-1/2" LENGTH
HP227
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 2-1/2 inches.
$19.26
$0.7704
$0.7704
ROLL PIN - PLAIN FINISH 1/8" X 5/8"
X1858RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/8
- Length is 5/8 inch
$23.40
$0.234
$0.234
