Pins
COTTER PIN - ZINC 1/8" X 3/4"
18X34CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 3/4 inch
$28.08
$0.2808
$0.2808
COTTER PIN - ZINC 1/8" X 3"
18X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 3 inches
$40.24
$0.4024
$0.4024
ROLL PIN - PLAIN FINISH 3/32" X 1"
3321RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1 inch
$23.85
$0.2385
$0.2385
ROLL PIN - PLAIN FINISH 3/32" X 1-1/2"
332112RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1-1/2 inches
$26.70
$0.267
$0.267
ROLL PIN - PLAIN FINISH 3/32" X 1/2"
33212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1/2 inch
$16.65
$0.1665
$0.1665
ROLL PIN - PLAIN FINISH 3/32" X 3/4"
33234RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 3/4 inch
$19.80
$0.198
$0.198
ROLL PIN - PLAIN FINISH 3/32" X 3/8"
33238RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 3/8 inch
$19.40
$0.194
$0.194
COTTER PIN - ZINC 3/32" X 1-1/2"
332X112CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-1/2 inches
$34.10
$0.341
$0.341
COTTER PIN - STAINLESS 3/32" X 1-1/2"
332X112SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1-1/2 inches
$24.00
$0.24
$0.24
COTTER PIN - ZINC 3/32" X 1-1/4"
332X114CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-1/4 inches
$31.44
$0.3144
$0.3144
COTTER PIN - STAINLESS 3/32" X 1-1/4"
332X114SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1-1/4 inches
$29.52
$0.2952
$0.2952
COTTER PIN - ZINC 3/32" X 1-3/4"
332X134CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-3/4 inches
$29.28
$0.2928
$0.2928
COTTER PIN - STAINLESS 3/32" X 1/2"
332X12SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1/2 inch
$24.72
$0.2472
$0.2472
COTTER PIN - ZINC 3/32" X 1"
332X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1 inch
$30.00
$0.30
$0.30
COTTER PIN - STAINLESS 3/32" X 1"
332X1SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1 inch
$23.40
$0.234
$0.234
COTTER PIN - ZINC 3/32" X 2-1/2"
332X212CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 2-1/2 inches
$49.20
$0.492
$0.492
COTTER PIN - STAINLESS 3/32" X 2"
332X2SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 2 inches
$40.00
$0.40
$0.40
COTTER PIN - STAINLESS 3/32" X 3/4"
332X34SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 3/4 inch
$24.00
$0.24
$0.24
COTTER PIN - ZINC 3/32" X 3/4"
332X34CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 3/4 inch
$29.40
$0.294
$0.294
COTTER PIN - ZINC 3/32" X 2"
332X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 2 inches
$40.00
$0.40
$0.40
ROLL PIN - PLAIN FINISH 3/16" X 1-1/4"
36114RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1-1/4 inches
$17.99
$0.3597
$0.3597
CLEVIS PIN - ADJUSTABLE PLAIN 3/16" DIA. 1-1/2" LONG
36112ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/16".
- Length: 1-1/2".
$7.98
$0.798
$0.798
ROLL PIN - PLAIN FINISH 3/16" X 1/2"
3612RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1/2 inch
$13.88
$0.2775
$0.2775
ROLL PIN - PLAIN FINISH 3/16" X 2-1/2"
36212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 2-1/2 inches
$27.28
$0.5456
$0.5456