Nuts
HEX FLANGE NUT METRIC ZINC M8-1.25
XFN8M
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Size: M8-1.25.
$40.00
$0.40
$0.40
HEX NUT STAINLESS UNC 5/16"-18
SSN5618
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 5/16"-18.
$29.40
$0.294
$0.294
HEX NUT STAINLESS UNC #8-32
SSN832
- A finished hex nut made from stainless steel.
- For use with grade stainless steel screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: #8-32.
$24.15
$0.2415
$0.2415
LOCK NUT NYLON UNF STAINLESS #10-32
LN1032SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #10-32.
$33.48
$0.3348
$0.3348
LOCK NUT NYLON UNC STAINLESS 1/4"-20
LN1420SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: 1/4"-20.
$39.38
$0.3938
$0.3938
HEX NUT METRIC ZINC M12-1.75 CL 8
M12X1.75N
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M12-1.75.
$19.855
$0.3971
$0.3971
HEX NUT UNC ZINC 3/4"-10 GR 5
N3410
- A finished hex nut made from low carbon steel.
- For use with grade 5 bolts.
- Proof load: 120,000 psi.
- Size: 3/4"-10.
- Zinc plated.
$28.5425
$1.1417
$1.1417
HEX NUT UNC ZINC #6-32 GR 5
N632
- Hex machine screw nuts made from low carbon steel.
- Threads are Unified Standard, Class 2B.
- Designed to be used specifically with machine screws.
- Zinc plated.
- Size: #6-32.
$12.20
$0.122
$0.122
HEX JAM NUT STAINLESS 1/2"-20
XJN1220SS
- A hex nut which is only 2/3 the thickness of a full form nut.
- Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened against the jam nut to keep it from loosening.
- Made from stainless steel.
- Size: 1/2-20".
$48.86
$0.9772
$0.9772
KEP NUT UNC STAINLESS #8-32
XKN832SS
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Stainless Steel.
$42.13
$0.4213
$0.4213
LOCK NUT NYLON STAINLESS #4-40
XLN440SS
- 18.8 Stainless Steel
- 4-40 Thread size
- These locknuts have good chemical resistance and may be mildly magnetic
- The nylon insert grips the bolt to resist loosening without damaging threads
- They're reusable, but their holding power lessens with each use
$19.40
$0.194
$0.194
