Nuts
HEX NUT METRIC ZINC M14-2.0 CL 10
XM14X2.0N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M14-2.0.
$26.08
$1.043
$1.043
HEX NUT METRIC ZINC M20-2.50 CL 10
XM20X2.5N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M20-2.50.
$47.21
$1.8883
$1.8883
WELL NUT 1/4"-20
XACD1420
- A well nut is a type of fastener used to blindly fasten a piece (much like an molly bolt) and to seal the bolt hole.
- It consists of a flanged neoprene bushing with a nut embedded in the non-flanged end.
- The bolt is passed through one of the pieces to be fastened and threaded on to the nut from the flanged end.
- The non-flanged end is then inserted through the other piece to be fastened.
- As the bolt is tightened, friction from the neoprene flange against the piece being fastened prevents the nut from turning.
- The bushing is compressed by the nut, forming a lip behind the piece being fastened, which compresses the fastened piece and seals the bolt hole.
- Well nuts are not particularly strong, but are useful for sealing holes and/or isolating vibrations.
- 1/4"-20 threads.
$399.06
$3.9906
$3.9906
HEX FLANGE NUT METRIC ZINC M6-1.00, SERRATED, 10.9
XFN6M10
- Hex Flange Nut
- Metric Zinc
- M6-1.00
- Serrated
- 10.9 class
$42.90
$0.429
$0.429
KEP NUT UNC ZINC #4-40
XKN440
- Keps Nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation
$35.88
$0.3588
$0.3588
HEX FLANGE NUT PLAIN 1/2"-13 GR 8
X8FN1213
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 1/2"-13.
$99.88
$1.9975
$1.9975
HEX FLANGE NUT PLAIN 1/4"-20 GR 8
X8FN1420
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 1/4"-20.
$44.80
$0.448
$0.448
HEX FLANGE NUT PLAIN 3/4"-10 GR 8
X8FN3410
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 3/4"-10.
$142.55
$2.8509
$2.8509
HEX FLANGE NUT NON SERRATED PLAIN 5/16"-18 GR 8
X8FN5618
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 5/16"-18.
$135.17
$1.3517
$1.3517
HEX FLANGE NUT PLAIN 5/8"-11 GR 8
X8FN5811
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 5/8"-11.
$69.39
$2.7755
$2.7755
LOCK NUT NYLON UNF ZINC 1/2"-20 GR 8
X8LN1220
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used in structural application with Grade 8 cap screws or bolts.
- Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
$87.53
$1.7505
$1.7505