Nuts

View as Grid List
Sort by
Display items per page
KN5618

KEP NUT UNC ZINC 5/16"-18

KN5618
  • Keps nuts, also known as K lock nuts.
  • A hex nut pre-assembled with a free spinning external tooth lock washer.
  • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
  • The most popular type of locknut because of its versatility, cost and ease of installation.
  • Steel, zinc plated.
  • Size: 5/16"-18.
    $25.32
    $0.2532
    + -
    LN1024SS

    LOCK NUT NYLON UNC STAINLESS #10-24

    LN1024SS
    • Hex nut with a nylon-filled collar at its back end.
    • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
    • Restricts movement of the screw when it is subjected to vibration.
    • Designed to be used with stainless steel machine screws and bolts.
    • Reusable.
    • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
    • Made form 18-8 or equivalent stainless steel.
    • Size: #10-24.
      $30.00
      $0.30
      + -
      LN1213

      LOCK NUT NYLON UNC ZINC 1/2"-13 GR 2

      LN1213
      • Hex nut with a nylon-filled collar at its back end.
      • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
      • Restricts movement of the screw when it is subjected to vibration.
      • Designed to be used with like-material machine screws and bolts.
      • Reusable.
      • Less expensive than Grade C Stover lock nuts.
      • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
      • Proof load: 90,000 psi. minimum.
      • Size: 1/2"-13.
      • Zinc plated.
        $25.76
        $0.5152
        + -
        LN1213SS

        LOCK NUT NYLON UNC STAINLESS 1/2"-13

        LN1213SS
        • Hex nut with a nylon-filled collar at its back end.
        • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
        • Restricts movement of the screw when it is subjected to vibration.
        • Designed to be used with stainless steel machine screws and bolts.
        • Reusable.
        • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
        • Made form 18-8 or equivalent stainless steel.
        • Size: 1/2"-13.
          $40.53
          $0.8106
          + -
          LN1024

          LOCK NUT NYLON UNC ZINC #10-24 GR 2

          LN1024
          • Hex nut with a nylon-filled collar at its back end.
          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
          • Restricts movement of the screw when it is subjected to vibration.
          • Designed to be used with like-material machine screws and bolts.
          • Reusable.
          • Less expensive than Grade C Stover lock nuts.
          • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
          • Proof load: 90,000 psi. minimum.
          • Size: #10-24.
          • Zinc plated.
            $21.60
            $0.216
            + -
            LN1032SS

            LOCK NUT NYLON UNF STAINLESS #10-32

            LN1032SS
            • Hex nut with a nylon-filled collar at its back end.
            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
            • Restricts movement of the screw when it is subjected to vibration.
            • Designed to be used with stainless steel machine screws and bolts.
            • Reusable.
            • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
            • Made form 18-8 or equivalent stainless steel.
            • Size: #10-32.
              $33.48
              $0.3348
              + -
              LN1224

              LOCK NUT NYLON UNC ZINC #12-24 GR 2

              LN1224
              • Hex nut with a nylon-filled collar at its back end.
              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
              • Restricts movement of the screw when it is subjected to vibration.
              • Designed to be used with like-material machine screws and bolts.
              • Reusable.
              • Less expensive than Grade C Stover lock nuts.
              • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
              • Proof load: 90,000 psi. minimum.
              • Size: #12-24.
              • Zinc plated.
                $25.56
                $0.2556
                + -
                LN1220

                LOCK NUT NYLON UNF ZINC 1/2"-20 GR 2

                LN1220
                • Hex nut with a nylon-filled collar at its back end.
                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                • Restricts movement of the screw when it is subjected to vibration.
                • Designed to be used with like-material machine screws and bolts.
                • Reusable.
                • Less expensive than Grade C Stover lock nuts.
                • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                • Proof load: 90,000 psi. minimum.
                • Size: 1/2"-20.
                • Zinc plated.
                  $21.35
                  $0.427
                  + -
                  LN1032

                  LOCK NUT NYLON UNF ZINC #10-32 GR 2

                  LN1032
                  • Hex nut with a nylon-filled collar at its back end.
                  • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                  • Restricts movement of the screw when it is subjected to vibration.
                  • Designed to be used with like-material machine screws and bolts.
                  • Reusable.
                  • Less expensive than Grade C Stover lock nuts.
                  • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                  • Proof load: 90,000 psi. minimum.
                  • Size: #10-24.
                  • Zinc plated.
                    $22.95
                    $0.2295
                    + -
                    LN1420SS

                    LOCK NUT NYLON UNC STAINLESS 1/4"-20

                    LN1420SS
                    • Hex nut with a nylon-filled collar at its back end.
                    • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                    • Restricts movement of the screw when it is subjected to vibration.
                    • Designed to be used with stainless steel machine screws and bolts.
                    • Reusable.
                    • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                    • Made form 18-8 or equivalent stainless steel.
                    • Size: 1/4"-20.
                      $39.38
                      $0.3938
                      + -
                      LN1428

                      LOCK NUT NYLON UNF ZINC 1/4"-28 GR 2

                      LN1428
                      • Hex nut with a nylon-filled collar at its back end.
                      • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                      • Restricts movement of the screw when it is subjected to vibration.
                      • Designed to be used with like-material machine screws and bolts.
                      • Reusable.
                      • Less expensive than Grade C Stover lock nuts.
                      • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                      • Proof load: 90,000 psi. minimum.
                      • Size: 1/4"-28.
                      • Zinc plated.
                        $15.90
                        $0.159
                        + -
                        LN3416

                        LOCK NUT NYLON UNF ZINC 3/4"-16 GR 2

                        LN3416
                        • Hex nut with a nylon-filled collar at its back end.
                        • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                        • Restricts movement of the screw when it is subjected to vibration.
                        • Designed to be used with like-material machine screws and bolts.
                        • Reusable.
                        • Less expensive than Grade C Stover lock nuts.
                        • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                        • Proof load: 90,000 psi. minimum.
                        • Size: 3/4"-16.
                        • Zinc plated.
                          $34.34
                          $1.3734
                          + -
                          LN3410

                          LOCK NUT NYLON UNC ZINC 3/4"-10 GR 2

                          LN3410
                          • Hex nut with a nylon-filled collar at its back end.
                          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                          • Restricts movement of the screw when it is subjected to vibration.
                          • Designed to be used with like-material machine screws and bolts.
                          • Reusable.
                          • Less expensive than Grade C Stover lock nuts.
                          • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                          • Proof load: 90,000 psi. minimum.
                          • Size: 3/4"-10.
                          • Zinc plated.
                            $37.67
                            $1.5067
                            + -
                            LN3816SS

                            LOCK NUT NYLON UNC STAINLESS 3/8"-16

                            LN3816SS
                            • Hex nut with a nylon-filled collar at its back end.
                            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                            • Restricts movement of the screw when it is subjected to vibration.
                            • Designed to be used with stainless steel machine screws and bolts.
                            • Reusable.
                            • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                            • Made form 18-8 or equivalent stainless steel.
                            • Size: 3/8"-16.
                              $49.28
                              $0.4928
                              + -
                              LN3824

                              LOCK NUT NYLON UNC ZINC 3/8"-24 GR 2

                              LN3824
                              • Hex nut with a nylon-filled collar at its back end.
                              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                              • Restricts movement of the screw when it is subjected to vibration.
                              • Designed to be used with like-material machine screws and bolts.
                              • Reusable.
                              • Less expensive than Grade C Stover lock nuts.
                              • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                              • Proof load: 90,000 psi. minimum.
                              • Size: 3/8"-24.
                              • Zinc plated.
                                $67.76
                                $0.6776
                                + -
                                LN440

                                LOCK NUT NYLON UNC ZINC #4-40 GR 2

                                LN440
                                • Hex nut with a nylon-filled collar at its back end.
                                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                • Restricts movement of the screw when it is subjected to vibration.
                                • Designed to be used with like-material machine screws and bolts.
                                • Reusable.
                                • Less expensive than Grade C Stover lock nuts.
                                • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                • Proof load: 90,000 psi. minimum.
                                • Size: #4-40.
                                • Zinc plated.
                                  $16.05
                                  $0.1605
                                  + -
                                  LN5618

                                  LOCK NUT NYLON UNC ZINC 5/16"-18 GR 2

                                  LN5618
                                  • Hex nut with a nylon-filled collar at its back end.
                                  • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                  • Restricts movement of the screw when it is subjected to vibration.
                                  • Designed to be used with like-material machine screws and bolts.
                                  • Reusable.
                                  • Less expensive than Grade C Stover lock nuts.
                                  • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                  • Proof load: 90,000 psi. minimum.
                                  • Size: 5/16"-18.
                                  • Zinc plated.
                                    $27.75
                                    $0.2775
                                    + -
                                    LN5618SS

                                    LOCK NUT NYLON UNC STAINLESS 5/16"-18

                                    LN5618SS
                                    • Hex nut with a nylon-filled collar at its back end.
                                    • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                    • Restricts movement of the screw when it is subjected to vibration.
                                    • Designed to be used with stainless steel machine screws and bolts.
                                    • Reusable.
                                    • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                                    • Made form 18-8 or equivalent stainless steel.
                                    • Size: 5/16"-18.
                                      $40.00
                                      $0.40
                                      + -
                                      LN5624

                                      LOCK NUT NYLON UNC ZINC 5/16"-24 GR 2

                                      LN5624
                                      • Hex nut with a nylon-filled collar at its back end.
                                      • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                      • Restricts movement of the screw when it is subjected to vibration.
                                      • Designed to be used with like-material machine screws and bolts.
                                      • Reusable.
                                      • Less expensive than Grade C Stover lock nuts.
                                      • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                      • Proof load: 90,000 psi. minimum.
                                      • Size: 5/16"-24.
                                      • Zinc plated.
                                        $25.80
                                        $0.258
                                        + -
                                        LN5818

                                        LOCK NUT NYLON UNF ZINC 5/8"-18 GR 2

                                        LN5818
                                        • Hex nut with a nylon-filled collar at its back end.
                                        • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                        • Restricts movement of the screw when it is subjected to vibration.
                                        • Designed to be used with like-material machine screws and bolts.
                                        • Reusable.
                                        • Less expensive than Grade C Stover lock nuts.
                                        • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                        • Proof load: 90,000 psi. minimum.
                                        • Size: 5/8"-18.
                                        • Zinc plated.
                                          $26.20
                                          $1.0479
                                          + -
                                          LN632

                                          LOCK NUT NYLON UNC ZINC #6-32 GR 2

                                          LN632
                                          • Hex nut with a nylon-filled collar at its back end.
                                          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                          • Restricts movement of the screw when it is subjected to vibration.
                                          • Designed to be used with like-material machine screws and bolts.
                                          • Reusable.
                                          • Less expensive than Grade C Stover lock nuts.
                                          • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                          • Proof load: 90,000 psi. minimum.
                                          • Size: #6-32.
                                          • Zinc plated.
                                            $19.80
                                            $0.198
                                            + -
                                            LN5618-2

                                            LOCK NUT, NYLON UNC, ZINC 5/16-18" GR 2, BLACK

                                            LN5618-2
                                            $43.23
                                            $0.8645
                                            + -
                                            LN7620

                                            LOCK NUT NYLON UNF ZINC 7/16"-20 GR 2

                                            LN7620
                                            • Hex nut with a nylon-filled collar at its back end.
                                            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                            • Restricts movement of the screw when it is subjected to vibration.
                                            • Designed to be used with like-material machine screws and bolts.
                                            • Reusable.
                                            • Less expensive than Grade C Stover lock nuts.
                                            • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                            • Proof load: 90,000 psi. minimum.
                                            • Size: 7/16"-20.
                                            • Zinc plated.
                                              $18.59
                                              $0.3718
                                              + -
                                              LN7614

                                              LOCK NUT NYLON UNC ZINC 7/16"-14 GR 2

                                              LN7614
                                              • Hex nut with a nylon-filled collar at its back end.
                                              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                              • Restricts movement of the screw when it is subjected to vibration.
                                              • Designed to be used with like-material machine screws and bolts.
                                              • Reusable.
                                              • Less expensive than Grade C Stover lock nuts.
                                              • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                              • Proof load: 90,000 psi. minimum.
                                              • Size: 7/16"-14.
                                              • Zinc plated.
                                                $21.50
                                                $0.43
                                                + -
                                                LN7614SS

                                                LOCK NUT NYLON UNC STAINLESS 7/16"-14

                                                LN7614SS
                                                • Hex nut with a nylon-filled collar at its back end.
                                                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                                • Restricts movement of the screw when it is subjected to vibration.
                                                • Designed to be used with stainless steel machine screws and bolts.
                                                • Reusable.
                                                • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                                                • Made form 18-8 or equivalent stainless steel.
                                                • Size: 7/16"-14.
                                                  $38.50
                                                  $0.77
                                                  + -
                                                  Refine
                                                  ×
                                                  Category
                                                  Thread Type
                                                  Availability