Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
METRIC MACH. SCREW PHILLIPS PAN HD M6-1.0 X 10
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M6-1.00 diameter.
- Length is 10 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$0.2496
FLAT WASHER METRIC ZINC M24 CL10
- Used to improve stress distribution, and to span large holes
- Din 125A
- Made from low carbon steel, zinc plated
$2.3842
FLAT WASHER USS 5/8" STAINLESS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 1-1/2"
$0.5784
CUP-POINT SOCKET SET-SCREW #10-24 X 3/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 3/4"
$0.4279
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1/2"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1/2".
$0.192
WOOD SCREW PHILLIPS FLAT HEAD #10 X 2-1/2"
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 10
- Length: 2-1/2"
$0.4816
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1-1/2"
$0.3144
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 4-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 4-1/2".
$4.6312
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 4", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 4".
$2.3247
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 5-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 5-1/2".
$4.2984
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 3/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 3/4"
$0.482
MACHINE SCREW SLOT TRUSS HEAD 1/4"-20 X 1/2"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- The truss head has a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same size.
- Made from AISI 1006-1022 or equivalent steel.
- Zinc plated.
- 1/4-20 diameter.
- Length of 1/2".
- Preferred in applications where minimal clearance exists above the head.
- Truss screws provide a trim, finished assembly appearance.
- Widely used as license plates screws.
$0.2295
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 3" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 3".
$1.057
SHEET METAL SCREW PHIL PAN HD #8 X 2-1/2"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2-1/2"
$0.448
SHEET METAL SCREW OVAL PHIL HD #8 X 3/8" STAINLESS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 3/8 inch
$0.15
HEX CAP SCREW BOLT UNF ZINC 9/16"18 X 4-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 4-1/2".
$4.2955
HEX CAP SCREW BOLT UNF ZINC 9/16"-18 X 5", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 5".
$8.6432
RIVET LARGE FLANGE ALUM/ALUM 1/8 DIAM GRIP .032-.125
- Aluminum rivet and aluminum mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 1/8
- Grip range .032-.125
- Head style: Large flange
$0.246
RIVET BUTTON HEAD ALUM/ALUM 5/32 DIAM GRIP .251-375
- Aluminum rivet and aluminum mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 5/32
- Grip range .251-.375
- Head style: Button head
$0.2916
RIVET LARGE FLANGE ALUM/ALUM 5/32 DIAM GRIP .251-375
- Aluminum rivet and aluminum mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 5/32
- Grip range .251-.375
- Head style: Large flange
$0.407