Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
RIVET BUTTON HEAD STEEL/STEEL 1/8 DIAM GRIP .188-.250
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 1/8
- Grip range .188-.250
- Head style: Button head
$0.186
RIVET BUTTON HEAD STEEL/STEEL 1/8 DIAM GRIP .313-.375
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 1/8
- Grip range .313-.375
- Head style: Button head
$0.2805
RIVET BUTTON HEAD STEEL/STEEL 5/32 DIAMETER GRIP .020-.125
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 5/32
- Grip range .062-.125
- Head style: Button head
$0.276
RIVET BUTTON HEAD STEEL/STEEL 3/16 DIAM GRIP .251-.375
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Button head
$0.3348
RIVET LARGE FLANGE STEEL/STEEL 3/16 DIAM GRIP .251-.375
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Large flange
$0.4213
RIVET BUTTON HEAD STEEL/STEEL 3/16 DIAM GRIP .376-.500
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Button head
$0.3564
METAL SCREW HEX WASHER HEAD #14 X 3"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 14
- Screw length 3 inches
$2.0397
HEX CAP SCREW BOLT METRIC ZINC M16-2.0 X 30, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M16-2.0.
- Length: 30 mm.
$2.3999
SOCKET HEAD CAPSCREW UNC STAINLESS 1/4"-20 X 1"
- Stainless Steel
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Diameter: 1/4-20"
- Length: 1"
$0.275
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-3/4" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.7272
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 2" THREAD CUTTING
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 2".
$1.1837
MACHINE SCREW PHIL PAN HD 1/4"-20 X 3" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 1/4-20 diameter.
- Length of 3".
$1.3062
MACHINE SCREW PHILLIPS PAN HEAD TYP-F 1/4"-20 X 3/4" THREAD CUTTING STAINLESS
$0.5352
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/4 inches
$0.2175
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$0.2916
RIVET BUTTON HEAD STAINLESS/STAINLESS 1/8 DIAMETER GRIP .313-.375
- Stainless steel rivet and stainless steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
$0.40
LOCKING PINS 1/4 X 2-1/4 SQUARE DOUBLE WIRE
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/4" grip
$2.8841