Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
HEX CAP SCREW BOLT METRIC ZINC M18-2.50 X 60, CL 10.9
- Greater tensile strength than class 8.8 bolts.
- Heat treated.
- Hex head cap screw with metric threads pitch made from medium carbon alloy steel.
- Metric coarse and fine threads.
- Most comparable but not exactly equivalent to US grade 8 cap screws.
$6.12
ACORN NUT STAINLESS 1/4"-20
- STAINLESS STEEL
- ACORN NUT
- 1/4" DIAMETER
- COARSE THREAD
$0.6424
FLAT HEAD SOCKET CAPSCREW UNC PLAIN 1/4"-20 X 1/2"
- FLAT HEAD CAP SCREW
- 1/4" DIAMETER
- COARSE THREAD
- LENGTH 1/2"
- THERMAL BLACK OXIDE FINISH
$0.2484
MACHINE SCREW PHIL TRUSS HD 1/4"-20 X 1-3/4" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.833
MACHINE SCREW PHILLIPS FLAT HEAD 1/4"-20 X 1" BLACK ZINC
- FLAT HEAD;
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Flat head Phillips.
$1.4788
RIVET LARGE FLANGE STEEL/STEEL 3/16 DIAM GRIP .376-.500
- Steel rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Large flange
$0.408
HEX CAP SCREW BOLT METRIC ZINC M14-1.50 X 40, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Plain finish.
- Metric fine threads.
$2.0093
SOCKET HEAD CAPSCREW UNC PLAIN #8-32 X 3/8"
- Made from alloy steel.
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Plain black finish.
- Diameter: #8-32
- Length: 3/8"
$0.2502
LOCK NUT STOVER PLAIN 5/8"-11 FLANGED
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Has a flange on the bottom side of the nut for a wider bearing surface.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Plain finish.
- Size: 5/8"-11.
$4.5252
TEK SCREW FLAT HEAD PHILLIPS #8 X 1-1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$0.7777
HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 12 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M8-1.25.
- Length: 12 mm.
$0.4422
METAL SCREW PHILLIPS FLAT HEAD #8 X 1"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$0.225
METAL SCREW SQ DRIVE FLAT HEAD #8 X 3/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 3/4 inch
$0.1575
METAL SCREW HEX HEAD BLACK OXIDE #8 X 3/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
$0.512