Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
HITCH PIN - ZINC .062 DIAMETER, 1-9/16A" LENGTH
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-9/16 inches.
$0.3575
LOCK NUT NYLON UNF STAINLESS #10-32
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #10-32.
$0.3348
LOCK NUT NYLON UNC STAINLESS 1/4"-20
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: 1/4"-20.
$0.3938
LOCK WASHER SPLIT USS ZINC 1/2" GR 5
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, zinc plated.
- Resists loosening caused by vibration and corrosion.
- Designed for use with grade 5 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .502 Max .512
- Outside Diameter: 0.869
$0.2484
HEX NUT METRIC ZINC M12-1.75 CL 8
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M12-1.75.
$0.3971
HEX NUT UNC ZINC 3/4"-10 GR 5
- A finished hex nut made from low carbon steel.
- For use with grade 5 bolts.
- Proof load: 120,000 psi.
- Size: 3/4"-10.
- Zinc plated.
$1.1417
HEX NUT UNC ZINC #6-32 GR 5
- Hex machine screw nuts made from low carbon steel.
- Threads are Unified Standard, Class 2B.
- Designed to be used specifically with machine screws.
- Zinc plated.
- Size: #6-32.
$0.122
HEX CAP SCREW BOLT METRIC ZINC M14-1.50 X 40, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Plain finish.
- Metric fine threads.
$2.0093
SS TEK SCREW HEX WASHER HD #14 X 1-1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$0.9779
FRAME BOLT FLANGE HD, NON-SERRATED, UNC ZINC 1/4"-20 X 2" GR 8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Zinc finish.
$1.7091
