Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
ELEVATOR BOLT UNC ZINC 1/4"-20 X 1"
- Bolt with a wide, countersunk flat head, a shallow conical bearing surface.
- With an integrally-formed square neck under the head, and a unfied thread pitch.
- Popular for use in conveyor systems.
- Proof load 33,000 psi
- Tensile strength 54,000 psi minimum
$0.718
MACHINE SCREW PHILLIPS FLAT HEAD 1/4"-20 X 1" BLACK ZINC
- FLAT HEAD;
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Flat head Phillips.
$1.4788
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-1/2" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.7427
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-3/4" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.7272
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 2" THREAD CUTTING
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 2".
$1.1837
MACHINE SCREW PHIL TRUSS HD 1/4"-20 X 2" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$1.0717
SOCKET HEAD CAPSCREW UNC STAINLESS 1/4"-20 X 3/4"
- Stainless Steel
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Diameter: 1/4-20"
- Length: 3/4"
$0.2737
MACHINE SCREW PHIL PAN HD 1/4"-20 X 3" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 1/4-20 diameter.
- Length of 3".
$1.12
ROLL PIN - PLAIN FINISH 1/4" X 2-1/4"
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 2-1/4 inches
$1.521
ROLL PIN - PLAIN FINISH 1/4" X 3"
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 3 inchs
$1.4996
HELICALLY COILED INSERT KIT UNC 1/2"-13
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/2"-13
- Drill size: 17/32
HELICALLY COILED INSERT KIT UNC 1/4"-20
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/4"-20
- Drill size: 17/64
HELICALLY COILED INSERT KIT UNC 3/8"-16
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:3/8"-16
- Drill size: 25/64
HELICALLY COILED INSERT KIT UNC 5/16"-18
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-18
- Drill size: 21/64
HELICALLY COILED INSERT KIT UNF 5/16"-24
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-24
- Drill size: 21/64
HELICALLY COILED INSERT KIT UNF 7/16"-20
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:7/16"-20
- Drill size: 29/64
