Screws
METAL SCREW HEX HEAD BLACK OXIDE #8 X 3/4"
X8X34H2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
$51.20
$0.512
$0.512
AUVECO PHIL TRUSS TRIM SCREW 6.3-1.81 X 16MM 15MM HEAD O.D. BLACK 50/BX
XA19170
- SCREW SIZE: M6.3-1.81
- LENGTH 16MM
- A/AB POINT
- PHILLIPS TRUSS HEAD
- 16MM HEAD DIAMETER
$16.72
SHEET METAL SCREW OVAL PHIL HD #6 X 3/4" STAINLESS
6X34OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 3/4 inch
$15.45
$0.1545
$0.1545
SHEET METAL SCREW PHIL PAN HD #8 X 2-1/2"
8X212P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2-1/2"
$44.80
$0.448
$0.448
SHEET METAL SCREW OVAL PHIL HD #8 X 3/8" STAINLESS
8X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 3/8 inch
$15.00
$0.15
$0.15
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1/2"
1024X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1/2".
$19.20
$0.192
$0.192
WOOD SCREW PHILLIPS FLAT HEAD #10 X 2-1/2"
10X212FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 10
- Length: 2-1/2"
$48.16
$0.4816
$0.4816
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
12X112FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1-1/2"
$31.44
$0.3144
$0.3144
MACHINE SCREW SLOT TRUSS HEAD 1/4"-20 X 1/2"
1420X12TH
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- The truss head has a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same size.
- Made from AISI 1006-1022 or equivalent steel.
- Zinc plated.
- 1/4-20 diameter.
- Length of 1/2".
- Preferred in applications where minimal clearance exists above the head.
- Truss screws provide a trim, finished assembly appearance.
- Widely used as license plates screws.
$22.95
$0.2295
$0.2295
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 3" STAINLESS
1420X3OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 3".
$105.70
$1.057
$1.057
WOOD SCREW PHILLIPS FLAT HEAD #14 X 2"
14X2FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 14
- Length: 2"
$84.70
$0.847
$0.847
SHEET METAL SCREW PHIL FLAT HD #14 X 1-1/2" STAINLESS
X14X112FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 1/4" X 1-1/2"
$79.44
$0.7944
$0.7944
SS TEK SCREW HEX WASHER HD #14 X 1-1/2"
X14X112TS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$162.37
$1.6237
$1.6237
SHEET METAL SCREW PHIL FLAT HD #14 X 1-1/4" STAINLESS
X14X114FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 1/4" X 1-1/4"
$60.00
$0.60
$0.60
SHEET METAL SCREW PHIL FLAT HD #14 X 1" STAINLESS
X14X1FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 1/4" X 1"
$42.00
$0.42
$0.42
METAL SCREW HEX WASHER HEAD #14 X 3"
X14X3H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 14
- Screw length 3 inches
$203.97
$2.0397
$2.0397
Refine
2 More
6 More