Screws
TEK SCREW HEX WASHER HD #10 X 1-1/2"
10X112T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/2"
$25.35
$0.2535
$0.2535
SHEET METAL SCREW PHIL PAN HD #10 X 3/4" STAINLESS
10X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 10
- Screw length 3/4 inch
$24.75
$0.2475
$0.2475
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/4"
1420X114
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/4".
$41.60
$0.416
$0.416
MACHINE SCREW SLOT TRUSS HEAD 1/4"-20 X 1/2"
1420X12TH
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- The truss head has a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same size.
- Made from AISI 1006-1022 or equivalent steel.
- Zinc plated.
- 1/4-20 diameter.
- Length of 1/2".
- Preferred in applications where minimal clearance exists above the head.
- Truss screws provide a trim, finished assembly appearance.
- Widely used as license plates screws.
$22.95
$0.2295
$0.2295
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 3" STAINLESS
1420X3OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 3".
$105.70
$1.057
$1.057
WOOD SCREW PHILLIPS FLAT HEAD #14 X 2-1/2"
14X212FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 14
- Length: 2-1/2"
$77.76
$0.7776
$0.7776
MACHINE SCREW PHIL OVAL HD #6-32 X 1" STAINLESS
632X1OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 6-32 diameter.
- Length of 1".
$18.60
$0.186
$0.186
SHEET METAL SCREW HEX WASH HD #6 X 1"
6X1H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 1 inch
$11.80
$0.118
$0.118
SHEET METAL SCREW OVAL PHIL HD #8 X 1-1/2" STAINLESS
8X112OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 1-1/2 inches
$27.72
$0.2772
$0.2772
SHEET METAL SCREW QUAD DR PAN HD #8 X 1 1/2" TAN HEAD
8X112RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$28.74
$0.2874
$0.2874
TEK SCREW RND WASHER HD PHILLIPS #8 X 1/2" , BLACK
8X12RWT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Round washer head, phillips drive.
- Steel zinc black.
- Diameter: 8
- Length: 1/2"
$16.48
$0.1648
$0.1648
SHEET METAL SCREW QUAD DR PAN HD #8 X 1" BLACK
8X1RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Black oxde.
- #8 diameter.
- Length: 1"
$25.50
$0.255
$0.255
TEK SCRW QUAD-DRIVE PAN HD #8 X 1" WHITE
8X1RHT3
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Zinc plated steel with white painted heads.
- Diameter: 8
- Length: 1"
$27.75
$0.2775
$0.2775
SHEET METAL SCREW PHIL PAN HD #8 X 2-1/2"
8X212P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2-1/2"
$44.80
$0.448
$0.448
TEK SCREW QUAD DR PAN HD #8 X 3/4" TAN HEAD
8X34RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$24.14
$0.2414
$0.2414
SHEET METAL SCREW OVAL PHIL HD #8 X 3/8" STAINLESS
8X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 3/8 inch
$15.00
$0.15
$0.15
Refine
6 More
2 More