Fasteners

Industrial Fasteners for Construction, Fabrication & Maintenance

Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.

Bolts, Screws & Threaded Rod

Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.

Nuts, Washers & Locking Hardware

Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.

Anchors & Threaded Inserts

Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.

Pins, Retaining Rings & Rivets

For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.

Specialty Fasteners & Hardware

Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.

Value Propositions

Broad selection of standard and metric fasteners for every application
Suitable for industrial, fleet, and maintenance use
Structural, mechanical, and anchoring solutions for diverse environments
Consistent sizing for efficient repair and replacement
Supports fabrication, installation, and equipment service

Display items per page

HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 1-3/4", GR 8

14X134C8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNC.
Diameter: 1/4"-20.
Length: 1-3/4".

$52.91
$0.5291

+ -

HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 1", GR 5

14X1C

Made from medium carbon steel.
Heat treated.
Tensile strength: 120,000 psi. minimum.
Zinc plated.
Unified screw threads :UNC.
Diameter: 1/4"-20.
Length: 1".

$28.56
$0.2856

+ -

HEX CAP SCREW BOLT UNF ZINC 1/4"-28 X 1-3/4", GR 8

14X134F8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNF.
Diameter: 1/4"-28.
Length: 1-3/4".

$44.72
$0.4472

+ -

HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 1", GR 8

14X1C8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNC.
Diameter: 1/4"-20.
Length: 1".

$26.34
$0.2634

+ -

COTTER PIN - ZINC 1/4" X 1"

14X1CP

Metal, extended prong type cotter pin.
Extended prong makes separating the tines easier.
Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
When used with castle or slotted nuts, it becomes a safety locking device.
Low carbon steel, zinc plated material
Diameter is 1/4 inch
Length is 1 inch

$13.04
$0.5216

+ -

HEX CAP SCREW BOLT UNF ZINC 1/4"-28 X 1", GR 5

14X1F

Made from medium carbon steel.
Heat treated.
Tensile strength: 120,000 psi. minimum.
Zinc plated.
Unified screw threads :UNF.
Diameter: 1/4"-28.
Length: 1".

$24.66
$0.2466

+ -

HEX CAP SCREW BOLT UNF ZINC 1/4"-28 X 1", GR 8

14X1F8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNF.
Diameter: 1/4"-28.
Length: 1".

$34.49
$0.3449

+ -

FENDER WASHER USS ZINC 1/4" X 1"

14X1FW

A flat washer with more surface area than a USS or SAE washer.
Made from thinner gauge metal than most flat washers.
Used where an extra wide bearing surface is required.
Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
Made of zinc plated steel.
Inside Diameter: 1/4"
Outside Diameter: 1"

$28.95
$0.2895

+ -

SHEET METAL SCREW HEX WASH HD #14 X 1"

14X1H

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
The washer and head are formed together as one piece. (Hex washer slotted head)
Increased bearing area reduces likelihood of crushing mating surfaces.
Zinc plated steel.
Screw diameter 14
Screw length 1 inch

$35.16
$0.3516

+ -

FENDER WASHER ZINC HEAVY DUTY 1/4" X 1" X 1/8" THICK

14X1FWHD

A flat washer with more surface area than a USS or SAE washer.
Made from heavier gauge metal than most flat washers.
Used where an extra wide bearing surface is required.
Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
Made of zinc plated steel.
Inside Diameter: 1/4"
Outside Diameter: 1"

$95.34
$0.9534

+ -

SHEET METAL SCREW OVAL PHIL HD #14 X 1" STAINLESS

14X1OP

A thread forming stainless tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
A countersunk head with a rounded top surface and a cone-shaped bearing surface.
Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
The countersunk surface nests into mating countersunk application sites.
Oval head, phillips drive
Screw diameter 14
Screw length 1 inch

$43.68
$0.4368

+ -

SHEET METAL SCREW PHIL PAN HD #14 X 1"

14X1P

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Phillips Pan Head
For general applications.
Can be substituted in most applications for round, truss or binding screws.
Steel zinc plated.
Diameter: 14
Length: 1"

$35.40
$0.354

+ -

SHEET METAL SCREW PHIL PAN HD #14 X 1" STAINLESS

14X1PSS

A thread forming stainless tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
For general applications.
Can be substituted in most applications for round, truss or binding screws.
Pan head, phillips drive
Screw diameter 14
Screw length 1 inch

$37.40
$0.374

+ -

TEK SCREW HEX WASHER HD #14 X 1", BLACK

14X1T2

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Hex washer head.
Steel zinc plated.

$142.68
$1.4268

+ -

TEK SCREW HEX WASHER HD 1/4" X 1"

14X1T

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Hex washer head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 14
Length: 1"

$35.75
$0.3575

+ -

HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 2-1/2", GR 5

14X212C

Made from medium carbon steel.
Heat treated.
Tensile strength: 120,000 psi. minimum.
Zinc plated.
Unified screw threads :UNC.
Diameter: 1/4"-20.
Length: 2-1/2".

$57.40
$0.574

+ -

HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 2-1/2", GR 8

14X212C8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNC.
Diameter: 1/4"-20.
Length: 2-1/2".

$52.36
$0.5236

+ -

COTTER PIN - ZINC 1/4" X 2-1/2"

14X212CP

Metal, extended prong type cotter pin.
Extended prong makes separating the tines easier.
Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
When used with castle or slotted nuts, it becomes a safety locking device.
Low carbon steel, zinc plated material
Diameter is 1/4 inch
Length is 2-1/2 inches

$22.1375
$0.8855

+ -