Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 5", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 5".
$5.0851
HEX CAP SCREW BOLT METRIC ZINC M12-1.75 X 60, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M12-1.75.
- Length: 60 mm.
$1.2483
HEX CAP SCREW BOLT UNC ZINC 1/2"-13 X 6", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
- Length: 6".
$2.9628
HEX CAP SCREW BOLT UNC ZINC 1/2"-13 X 6", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
- Length: 6".
$3.7206
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 6", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 6".
$4.158
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 6", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 6".
$4.4532
HEX CAP SCREW BOLT METRIC ZINC M12-1.75 X 70, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M12-1.75.
- Length: 70 mm.
$1.8031
HEX CAP SCREW BOLT METRIC ZINC M12-1.75 X 80, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M12-1.75.
- Length: 80 mm.
$0.926
CLEVIS PIN - ADJUSTABLE PLAIN 1/4" DIA. 1-1/2" LONG
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 1/4".
- Length: 1-1/2".
$1.6315
HEX CAP SCREW UNC STAINLESS 1/4"-20 X 1-1/2"
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/4"-20.
- Length: 1-1/2".
$0.4802
HEX CAP SCREW UNC STAINLESS 1/4"-20 X 1-1/4"
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/4"-20.
- Length: 1-1/4".
$0.3174
ROLL PIN - PLAIN FINISH 1/4" X 1-1/2"
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1-1/2 inches
$0.5874
HEX CAP SCREW UNC STAINLESS 1/4"-20 X 1/2"
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/4"-20.
- Length: 1/2".
$0.24
CLEVIS PIN - ADJUSTABLE PLAIN 1/4" DIA. 1" LONG
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 1/4".
- Length: 1".
$1.0395
HEX CAP SCREW UNC STAINLESS 1/4"-20 X 1"
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/4"-20.
- Length: 1".
$0.3201
ROLL PIN - PLAIN FINISH 1/4" X 1"
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1 inch
$0.438
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 1/2"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 1/2"
$0.416
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 1/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 1/4"
$0.2916
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 3/8"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 3/8"
$0.4103
WING NUT UNC ZINC 1/4"-20
- A nut with wings which allow the part to be manually turned.
- Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
- Made from cold forged steel.
- Zinc plated.
- Size: 1/4"-20.
$0.4026
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 5/6"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 5/16"
$0.7384
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1".
$0.3528
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/2"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/2".
$0.3264
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1-1/2" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1-1/2".
$1.057