Brass Fittings
PUSH TO CONNECT, DOT BRASS UNION TEE, 1/2" TUBE
X264PMTX8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools requir
- There are no nuts or sleeves used in their application.
- Union tee connector
- 1/2" Tube
$199.2375
$39.8475
$39.8475
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/4" TUBE X 1/4" MALE PIPE
X269PMTNSX4X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 1/4" tubing o.d., 1/4" male pipe
$56.385
$11.277
$11.277
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 5/8" TUBE X 3/8" MALE PIPE
X269PMTNSX10X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools requir
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
- 5/8" tube to 3/8" male pipe
$28.80
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 3/8" TUBE X 1/8" MALE PIPE
X269PMTNSX6X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
$177.345
$35.469
$35.469
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 3/8" TUBE X 3/8" MALE PIPE
X269PMTNSX6X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 3/8" tubing o.d., 3/8" male pipe
$98.5875
$19.7175
$19.7175
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 3/8" TUBE X 1/4" MALE PIPE
X269PMTNSX6X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 3/8" tubing o.d., 1/4" male pipe
$95.48
$19.096
$19.096
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 3/8" TUBE X 1/2" MALE PIPE
X269PMTNSX6X8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 3/8" tubing o.d., 1/2" male pipe
$119.494
$23.8988
$23.8988
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/2" TUBE X 1/4" MALE PIPE
X269PMTNSX8X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
$140.1565
$28.0313
$28.0313
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/2" TUBE X 3/8" MALE PIPE
X269PMTNSX8X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 1/2" tubing o.d., 3/8" male pipe
$83.10
$16.62
$16.62
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/2" TUBE X 1/2" MALE PIPE
X269PMTNSX8X8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 1/2" tubing o.d., 1/2" male pipe
$102.5815
$20.5163
$20.5163
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, SWIVEL, 5/8" TUBE X 3/8" MALE PIPE
X269PMTX10X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools requir
- There are no nuts or sleeves used in their application.
- 90° male elbow, swivel
- 5/8" tube to 3/8" male pipe
$47.425
BRASS TRANSMISSION MALE ELBOW 1/8" TUBE X 1/8" PIPE
X269TFX2X2
- Transmission fitting
- These are typically used in pressure protected air transmission applications and air seats.
- The fittings use a notched sleeve to help eliminate stress from over-torque.
- These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
- These are DOT approved.
- Easy to assemble, no flaring required.
- 90° male elbow
- Size 1/8" tubing o.d., 1/8" male pipe
$51.075
$10.215
$10.215
BRASS TRANSMISSION MALE ELBOW 5/32" TUBE X 1/8" PIPE
X269TFX532X2
- Transmission fitting
- These are typically used in pressure protected air transmission applications and air seats.
- The fittings use a notched sleeve to help eliminate stress from over-torque.
- These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
- These are DOT approved.
- Easy to assemble, no flaring required.
- 90° male elbow
- Size 5/32" tubing o.d., 1/8" male pipe
$146.3625
$29.2725
$29.2725
BRASS UNION INVERTED FLARE 3/16"
X302X3
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Union connector
- Size 3/16" tubing o.d.
$23.40
$4.68
$4.68
HOSE FITTING MALE PIPE RIGID 3/8 TUBE 1/4" MALE PIPE
X30182-4-6B
- Material: Brass
- 1-piece, field attachable, reusable, push-on style fitting which permits quick, easy field assembly without special tools.
- Do not require the use of clamps.
- Used with 801, 804, 821, 821FR, 831 and 836 hoses.
$6.127
BRASS UNION INVERTED FLARE 1/4"
X302X4
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Union connector
- Size 1/4" tubing o.d.
$42.25
$8.45
$8.45
BRASS UNION INVERTED FLARE 5/16"
X302X5
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Union connector
- Size 5/16" tubing o.d.
$16.923
$3.3846
$3.3846
BRASS UNION INVERTED FLARE 3/8"
X302X6
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Union connector
- Size 3/8" tubing o.d.
$28.0445
$5.6089
$5.6089
BRASS PIPE CAP 1/8"
X3129X2
- Pipe brass fitting
- Typical applications include grease, fluids, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- Operating pressure up to 1200 PSI
- Used with brass, bronze, copper, steel, aluminum, and iron pipe
- Meets specifications and standards of ASA, ASME, and SAE
- Bar stock cap
- 1/8" pipe
$31.525
$3.1525
$3.1525
BRASS PIPE CAP 1/4"
X3129X4
- Pipe brass fitting
- Typical applications include grease, fluids, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- Operating pressure up to 1200 PSI
- Used with brass, bronze, copper, steel, aluminum, and iron pipe
- Meets specifications and standards of ASA, ASME, and SAE
- Bar stock cap
- 1/4" pipe
$56.40
$5.64
$5.64
BRASS PIPE CAP 3/8"
X3129X6
- Pipe brass fitting
- Typical applications include grease, fluids, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- Operating pressure up to 1200 PSI
- Used with brass, bronze, copper, steel, aluminum, and iron pipe
- Meets specifications and standards of ASA, ASME, and SAE
- Bar stock cap
- 3/8" pipe
$35.7775
$7.1555
$7.1555
BRASS PIPE SQUARE HEAD PLUG 1/8" MALE
X3151X2
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Size 1/8" male pipe
$11.4465
$2.2893
$2.2893
BRASS PIPE SQUARE HEAD PLUG 1/4" MALE
X3151X4
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Size 1/4" male pipe
$16.1525
$3.2305
$3.2305
BRASS PIPE CAP 1/2"
X3129X8
- Pipe brass fitting
- Typical applications include grease, fluids, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- Operating pressure up to 1200 PSI
- Used with brass, bronze, copper, steel, aluminum, and iron pipe
- Meets specifications and standards of ASA, ASME, and SAE
- Bar stock cap
- 1/2" pipe
$46.10
$9.22
$9.22
BRASS PIPE SQUARE HEAD PLUG 1/2" MALE
X3151X8
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Size 1/2" male pipe
$39.4075
$7.8815
$7.8815
Refine