Bolts
HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 25, CL 8.8
8X25M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M8-1.25.
- Length: 25 mm.
$14.49
$0.2898
$0.2898
HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 70, CL 8.8
8X70M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M8-1.25.
- Length: 70 mm.
$26.85
$0.537
$0.537
HEX CAP SCREW BOLT UNF ZINC 9/16"-18 X 2", GR 8
96X2F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 2".
$63.8325
$2.5533
$2.5533
HEX CAP SCREW BOLT UNF ZINC 9/16"-18 X 3-1/2", GR 8
96X312F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 3-1/2".
$150.34
$6.0136
$6.0136
HEX CAP SCREW BOLT UNF ZINC 9/16"18 X 4-1/2", GR 8
96X412F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 4-1/2".
$107.3875
$4.2955
$4.2955
HEX CAP SCREW BOLT UNF ZINC 9/16"-18 X 4", GR 8
96X4F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 4".
$87.6275
$3.5051
$3.5051
HEX CAP SCREW BOLT UNF ZINC 9/16"-18 X 5", GR 8
96X5F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 9/16"-18.
- Length: 5".
$216.08
$8.6432
$8.6432
CARRIAGE BOLT UNC ZINC 3/8"-16 X 1-1/2" GR A
X38X112CB
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 3/8"-16.
- Length: 1-1/2".
$34.76
$0.3476
$0.3476
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 3/8"-16 X 1-1/2" GR8
X38X112CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter:3/8"-16.
- Length: 1-1/2".
$177.08
$1.7708
$1.7708
HEX CAP SCREW BOLT UNC FULLY THREADED ZINC 3/8"-16 X 1-1/2" GR 2
X38X112CTAP
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 74,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
$33.28
$0.3328
$0.3328
CARRIAGE BOLT UNC ZINC 3/8"-16 X 2-1/2" GR A
X38X212CB
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 3/8"-16.
- Length: 2-1/2".
$33.30
$0.666
$0.666
FRAME BOLT, FLANGE HEAD, NON-SERRATED, PLAIN, 3/8"-16 X 2" GR 8, PLAIN
X38X2CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter:3/8"-16.
- Length: 2".
$314.24
$3.1424
$3.1424
HEX CAP SCREW BOLT 3/8"-16 X 3-1/4" GR 8 ZINC
X38X314C8
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 3/8"-16.
$138.00
$2.76
$2.76
MACHINE SCREW PHIL FLAT HD #4-40 X 1/2" STAINLESS
X440X12FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$40.00
$0.40
$0.40
MACHINE SCREW PHIL PAN HD #4-40 X 5/8" STAINLESS
X440X58PSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
$15.00
$0.15
$0.15
HEX CAP SCREW UNC STAINLESS 5/16"-18 X 1-3/4"
X56134CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/16"-18.
$75.90
$0.759
$0.759
MACHINE SCREW PHIL TRUSS HD 5/16"-18 X 1-1/4" STAINLESS
X5618X114THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$91.70
$0.917
$0.917
HEX FLANGE BOLT SERRATED 5/16"-18 X 1/2"
X5618X12HF
- Designed with a built-in washer underneath the head of the bolt — distributing the clamping load over a wider area.
- This eliminates the need for a separate washer, as it provides the same holding power.
- Property class 10.9
- Diameter 5/16"-18
- Length: 1/2"
$211.19
$2.1119
$2.1119
MACHINE SCREW PHIL TRUSS HD 5/16"-18 X 3/4" STAINLESS
X5618X34THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$76.30
$0.763
$0.763
CARRIAGE BOLT UNC ZINC 5/16"-18 X 1-1/2" GR A
X56X112CB
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/16"-18.
- Length: 1-1/2".
$25.32
$0.2532
$0.2532
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/16"-18 X 1-1/2" GR8
X56X112CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/16"-18.
- Length: 1-1/2".
$128.96
$1.2896
$1.2896
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 2-1/2"
X58212CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$63.00
$2.52
$2.52
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 2-1/4"
X58214CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$50.825
$2.033
$2.033
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 3"
X583CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$77.525
$3.101
$3.101
Refine
48 More
44 More