Screws
TEK SCREW HEX WASHER HD #12 X 2"
12X2T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 2"
$33.48
$0.3348
$0.3348
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/2"
1420X112
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/2".
$40.48
$0.4048
$0.4048
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1-1/2" STAINLESS
1420X112OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1-1/2".
$105.70
$1.057
$1.057
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/4"
1420X114
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/4".
$41.60
$0.416
$0.416
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1-1/4" STAINLESS
1420X114OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1-1/4".
$40.00
$0.40
$0.40
WOOD SCREW PHILLIPS FLAT HEAD #14 X 1-1/2"
14X112FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 14
- Length: 1-1/2"
$41.76
$0.4176
$0.4176
SHEET METAL SCREW OVAL PHIL HD #14 X 1-1/2" STAINLESS
14X112OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 14
- Screw length 1-1/2 inches
$55.92
$0.5592
$0.5592
SHEET METAL SCREW PHIL PAN HD #14 X 1-1/2"
14X112P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 14
- Length: 1-1/2"
$33.44
$0.3344
$0.3344
SHEET METAL SCREW PHIL PAN HD #14 X 1-1/2" STAINLESS
14X112PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 14
- Screw length 1-1/2 inches
$76.00
$0.76
$0.76
SHEET METAL SCREW OVAL PHIL HD #14 X 1-1/4" STAINLESS
14X114OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 14
- Screw length 1-1/4 inches
$41.47
$0.4147
$0.4147
SHEET METAL SCREW PHIL PAN HD #14 X 1-1/4"
14X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 14
- Length: 1-1/4"
$34.32
$0.3432
$0.3432
SHEET METAL SCREW HEX WASH HD #14 X 1-1/4"
14X114H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 14
- Screw length 1-1/4 inches
$37.07
$0.3707
$0.3707
SHEET METAL SCREW HEX WASH HD #14 X 1/2"
14X12H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 14
- Screw length 1/2 inch
$40.48
$0.4048
$0.4048
SHEET METAL SCREW PHIL PAN HD #14 X 1/2"
14X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 14
- Length: 1/2"
$35.42
$0.3542
$0.3542
TEK SCREW HEX WASHER HD 1/4" X 1/2"
14X12T
- HEX WASHER HEAD
- #14 DIAMETER
- 1/2" LENGTH
- ZINC FINISH
$28.68
$0.2868
$0.2868
SHEET METAL SCREW OVAL PHIL HD #14 X 1" STAINLESS
14X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 14
- Screw length 1 inch
$43.68
$0.4368
$0.4368
SHEET METAL SCREW PHIL PAN HD #14 X 1"
14X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 14
- Length: 1"
$35.40
$0.354
$0.354
SHEET METAL SCREW PHIL PAN HD #14 X 1" STAINLESS
14X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 14
- Screw length 1 inch
$37.40
$0.374
$0.374
WOOD SCREW PHILLIPS FLAT HEAD #14 X 2-1/2"
14X212FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 14
- Length: 2-1/2"
$77.76
$0.7776
$0.7776
SHEET METAL SCREW HEX WASH HD #14 X 2"
14X2H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 14
- Screw length 2 inches
$43.50
$0.435
$0.435
SHEET METAL SCREW OVAL PHIL HD #14 X 2" STAINLESS
14X2OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 14
- Screw length 2 inches
$91.00
$0.91
$0.91
Refine
2 More
6 More