Heat Shrink Tubing

View as Grid List
Sort by
Display items per page
PHS34

HEAT SHRINK POLYOLEFIN 4' STK 3/4" ID, BLACK, 2:1 S/R

PHS34
  • Flame retardant polyolefin heat shrink tubing.
  • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
  • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
  • 2:1 shrink ratio.
  • Meets mil spec MIL-I-23053/5.
  • 3/4 inch i.d.
  • 4' stick
  • Black
    $6.314
    + -
    PHS36-5

    HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, YELLOW, 2:1 S/R

    PHS36-5
    • Flame retardant polyolefin heat shrink tubing.
    • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
    • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
    • 2:1 shrink ratio.
    • Meets mil spec MIL-I-23053/5.
    • 3/16 inch i.d.
    • 4' stick
    • Yellow
      $3.0336
      + -
      PHS36-6

      HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, BLUE, 2:1 S/R

      PHS36-6
      • Flame retardant polyolefin heat shrink tubing.
      • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
      • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
      • 2:1 shrink ratio.
      • Meets mil spec MIL-I-23053/5.
      • 3/16 inch i.d.
      • 4' stick
      • Blue
        $3.0336
        + -
        PHS36-7

        HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, GREEN, 2:1 S/R

        PHS36-7
        • Flame retardant polyolefin heat shrink tubing.
        • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
        • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
        • 2:1 shrink ratio.
        • Meets mil spec MIL-I-23053/5.
        • 3/16 inch i.d.
        • 4' stick
        • Green
          $3.0336
          + -
          PHS36C

          HEAT SHRINK POLYOLEFIN 100' RL 3/16" ID, BLACK, 2:1 S/R

          PHS36C
          • Flame retardant polyolefin heat shrink tubing.
          • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
          • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
          • 2:1 shrink ratio.
          • Meets mil spec MIL-I-23053/5.
          • 3/16 inch i.d.
          • 100' roll
          • Black
            $74.10
            $0.741
            + -
            PHS36-CL

            HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, CLEAR, 2:1 S/R

            PHS36-CL
            • Flame retardant polyolefin heat shrink tubing.
            • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
            • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
            • 2:1 shrink ratio.
            • Meets mil spec MIL-I-23053/5.
            • 3/16 inch i.d.
            • 4' stick
            • Clear
              $3.0336
              + -
              PHS38-3

              HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, WHITE, 2:1 S/R

              PHS38-3
              • Flame retardant polyolefin heat shrink tubing.
              • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
              • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
              • 2:1 shrink ratio.
              • Meets mil spec MIL-I-23053/5.
              • 3/8 inch i.d.
              • 4' stick
              • White
                $3.9552
                + -
                PHS38-5

                HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, YELLOW, 2:1 S/R

                PHS38-5
                • Flame retardant polyolefin heat shrink tubing.
                • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                • 2:1 shrink ratio.
                • Meets mil spec MIL-I-23053/5.
                • 3/8 inch i.d.
                • 4' stick
                • Yellow
                  $3.9552
                  + -
                  PHS36-1

                  HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, RED, 2:1 S/R

                  PHS36-1
                  • Flame retardant polyolefin heat shrink tubing.
                  • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                  • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                  • 2:1 shrink ratio.
                  • Meets mil spec MIL-I-23053/5.
                  • 3/16 inch i.d.
                  • 4' stick
                  • Red
                    $4.3008
                    + -
                    PHS36

                    HEAT SHRINK POLYOLEFIN 4' STK 3/16" ID, BLACK, 2:1 S/R

                    PHS36
                    • Flame retardant polyolefin heat shrink tubing.
                    • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                    • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                    • 2:1 shrink ratio.
                    • Meets mil spec MIL-I-23053/5.
                    • 3/16 inch i.d.
                    • 4' stick
                    • Black
                      $3.144
                      + -
                      PHS38-6

                      HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, BLUE, 2:1 S/R

                      PHS38-6
                      • Flame retardant polyolefin heat shrink tubing.
                      • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                      • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                      • 2:1 shrink ratio.
                      • Meets mil spec MIL-I-23053/5.
                      • 3/8 inch i.d.
                      • 4' stick
                      • Blue
                        $5.952
                        + -
                        PHS38-7

                        HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, GREEN, 2:1 S/R

                        PHS38-7
                        • Flame retardant polyolefin heat shrink tubing.
                        • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                        • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                        • 2:1 shrink ratio.
                        • Meets mil spec MIL-I-23053/5.
                        • 3/8 inch i.d.
                        • 4' stick
                        • Green
                          $5.184
                          + -
                          PHS38C

                          HEAT SHRINK POLYOLEFIN 100' RL 3/8" ID, BLACK, 2:1 S/R

                          PHS38C
                          • Flame retardant polyolefin heat shrink tubing.
                          • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                          • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                          • 2:1 shrink ratio.
                          • Meets mil spec MIL-I-23053/5.
                          • 3/8 inch i.d.
                          • 100' roll
                          • Black
                            $91.85
                            $0.9185
                            + -
                            PHS38-CL

                            HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, CLEAR, 2:1 S/R

                            PHS38-CL
                            • Flame retardant polyolefin heat shrink tubing.
                            • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                            • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                            • 2:1 shrink ratio.
                            • Meets mil spec MIL-I-23053/5.
                            • 3/8 inch i.d.
                            • 4' stick
                            • Clear
                              $5.184
                              + -
                              PHS38

                              HEAT SHRINK POLYOLEFIN 4' STK 3/8" ID, BLACK, 2:1 S/R

                              PHS38
                              • Flame retardant polyolefin heat shrink tubing.
                              • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                              • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                              • 2:1 shrink ratio.
                              • Meets mil spec MIL-I-23053/5.
                              • 3/8 inch i.d.
                              • 4' stick
                              • Black
                                $3.576
                                + -
                                PHS34C

                                HEAT SHRINK POLYOLEFIN 100' RL 3/4" ID, BLACK, 2:1 S/R

                                PHS34C
                                • Flame retardant polyolefin heat shrink tubing.
                                • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                • 2:1 shrink ratio.
                                • Meets mil spec MIL-I-23053/5.
                                • 3/4 inch i.d.
                                • 100' roll
                                • Black
                                  $186.55
                                  $1.8655
                                  + -
                                  XHSS62

                                  HEAT SHRINK HEAVY-WALL 4' STK, 3/8" ID BLACK, 3:1 S/R

                                  XHSS62
                                  $23.55
                                  + -
                                  XMWHS1-1

                                  HEAT SHRINK MULTI-WALL, 4' STK 1" ID, RED, 3:1 S/R

                                  XMWHS1-1
                                  • Flame retardant polyolefin heat shrink tubing.
                                  • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                  • Still highly flexible for conforming to irregular shapes.
                                  • 3:1 shrink ratio.
                                  • Protection of automobile, marine and truck wire splices and harness breakouts.
                                  • Meets mil spec MIL-DTL-23053/4, Class 3.
                                  • 1 inch i.d.
                                  • 4 foot stick
                                  • Red
                                    $20.2673
                                    + -
                                    XMWHS12-1

                                    HEAT SHRINK MULTI-WALL, 4' STK 1/2" ID, RED, 3:1 S/R

                                    XMWHS12-1
                                    • Flame retardant polyolefin heat shrink tubing.
                                    • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                    • Still highly flexible for conforming to irregular shapes.
                                    • 3:1 shrink ratio.
                                    • Protection of automobile, marine and truck wire splices and harness breakouts.
                                    • Meets mil spec MIL-DTL-23053/4, Class 3.
                                    • 1/2 inch i.d.
                                    • 4' stick
                                    • Red
                                      $11.2707
                                      + -
                                      XMWHS14-1

                                      HEAT SHRINK MULTI-WALL, 4' STK 1/4" ID, RED, 3:1 S/R

                                      XMWHS14-1
                                      • Flame retardant polyolefin heat shrink tubing.
                                      • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                      • Still highly flexible for conforming to irregular shapes.
                                      • 3:1 shrink ratio.
                                      • Protection of automobile, marine and truck wire splices and harness breakouts.
                                      • Meets mil spec MIL-DTL-23053/4, Class 3.
                                      • 4' stick
                                      • Red
                                        $7.9895
                                        + -
                                        XMWHS18-1

                                        HEAT SHRINK MULTI-WALL, 4' STK 1/8" ID, RED, 3:1 S/R

                                        XMWHS18-1
                                        • Flame retardant polyolefin heat shrink tubing.
                                        • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                        • Still highly flexible for conforming to irregular shapes.
                                        • 3:1 shrink ratio.
                                        • Protection of automobile, marine and truck wire splices and harness breakouts.
                                        • Meets mil spec MIL-DTL-23053/4, Class 3.
                                        • 1/8 inch i.d.
                                        • 4' stick
                                        • Red
                                          $7.564
                                          + -
                                          XMWHS34-1

                                          HEAT SHRINK MULTI-WALL, 4' STK 3/4" ID, RED, 3:1 S/R

                                          XMWHS34-1
                                          • Flame retardant polyolefin heat shrink tubing.
                                          • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                          • Still highly flexible for conforming to irregular shapes.
                                          • 3:1 shrink ratio.
                                          • Protection of automobile, marine and truck wire splices and harness breakouts.
                                          • Meets mil spec MIL-DTL-23053/4, Class 3.
                                          • 3/4 inch i.d.
                                          • 4' stick
                                          • Red
                                            $15.3276
                                            + -
                                            XMWHS36-1

                                            HEAT SHRINK MULTI-WALL, 4' STK 3/16" ID, RED, 3:1 S/R

                                            XMWHS36-1
                                            • Flame retardant polyolefin heat shrink tubing.
                                            • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                            • Still highly flexible for conforming to irregular shapes.
                                            • 3:1 shrink ratio.
                                            • Protection of automobile, marine and truck wire splices and harness breakouts.
                                            • Meets mil spec MIL-DTL-23053/4, Class 3.
                                            • 3/16 inch i.d.
                                            • 4' stick
                                            • Red
                                              $7.8395
                                              + -
                                              XPHS112

                                              HEAT SHRINK POLYOLEFIN 4' STK 1-1/2" ID, BLACK, 2:1 S/R

                                              XPHS112
                                              • Flame retardant polyolefin heat shrink tubing.
                                              • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                              • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                              • 2:1 shrink ratio.
                                              • Meets mil spec MIL-I-23053/5.
                                              • 1-1/2 inch i.d.
                                              • 4' stick
                                              • Black
                                                $22.275
                                                + -
                                                XPHS12-1C

                                                HEAT SHRINK POLYOLEFIN 100' RL 1/2" ID, RED, 2:1 S/R

                                                XPHS12-1C
                                                • Flame retardant polyolefin heat shrink tubing.
                                                • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                                • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                                • 2:1 shrink ratio.
                                                • Meets mil spec MIL-I-23053/5.
                                                  $138.88
                                                  $1.3888
                                                  + -
                                                  Refine
                                                  ×
                                                  Price Range
                                                  Category
                                                  Color
                                                  1 More
                                                  Container
                                                  Inside Diameter
                                                  8 More
                                                  Material
                                                  Quantity
                                                  Shrink Ratio
                                                  Wall Type
                                                  Availability