Ram Products | Hand Tools

CABLE CUTTING HAND TOOL 9" LONG

CCT

Forged steel cable cutter.
9" size, easily fits any tool box.
6 month manufacturer’s warranty.
Cuts soft copper cable up to 2/0 gauge.
Ergonomic, insulated grips for user protection.

$36.8225

+ -

CRIMP TOOL-IDEAL 30-429 CRIMPS 10-22 AWG INS/NON-INS

CT2

9 ¾” multi-crimp tool.
Crimps bare or insulated terminals and splices on 10 to 22 gauge wire.
Knife-to-anvil blades never need re-sharpening.
Excellent leverage for easy crimping and cutting.
Drop-forged, high carbon steel construction.
Dipped, vinyl coated handles provide a solid, comfortable grip.

$79.075

+ -

CRIMP TOOL-DEUTSCH RATCHETING

DCT

4 indent crimper.
For crimping of closed-barrel D-sub contacts.
Adjustable pin height locator.
Comfortable handles for low effort operation.
Crimps 20 to 12 AWG.
Can be used with Deutsch DT series contacts.

$90.975

+ -

CRIMP TOOL - AUVECO

XA16004

Open barrel terminal crimp tool.
Five cavities perform “B” type conductor and insulation crimps.
Conductor crimp maximum range is 12 to 14 AWG.
Insulation crimp maximum range is 24 to 14 AWG.
Overall length of tool is 8-1/2".
Duplicates factory crimp on open barrel terminals used in automotive, computer and control applications.

$69.8289

+ -

CIRCUIT TESTER 24 VOLT WIRELESS

XCT8002

Computer, safe, all solid state electronics circuit tester.
Safe to use around automotive computers, electronics, sensors and air bags.
It requires no wire or clip connector to ground.
The XCT8002's LED, sound and vibration indicators, allow users to check for power in less time.
Designed for use in automobiles, trucks, tractors, trailers, RV's, motorcycles, boats and any DC powered circuit from 3 to 28 volts.
Safety V-groove needle accessory for piercing and carrying.
This professional, rugged, stainless steel metal construction tester is built to last, damage resistant, and easy to use.
Solid state lamp for lifetime lasting performance.
Long-life N size alkaline batteries installed.

$41.195

+ -

MICRO TORCH-HAND HELD BLAZER/SELF-IGNITING WTH BASE

XGB2001

Hand-held, butane refillable, micro torch.
Features state of the art Piezo electric ignition system to support up to a 2500° flame.
Air adjustment and gas flow knobs for superior flame control.
The main tank body features a diamond grid design for a superior and extra safe, grip and also includes a detachable base for hands free table-top work.
Ideal for automotive repair work, electronic systems repair, plumbing, soldering, heat shrink tubing, HVAC, and other professional repair shop work.

$106.25

+ -

TOOL-NARROW PICK WEATHERPACK DELPHI #12094429

WPNPT

Terminal pick.
Tapers to a .035" width.
Used to release 150 Metri-Pack, 280 Metri-Pack, 280 Tangless, 630 Pull to Seat, GT150, and Wedge Base lamp socket terminals.
Replaces Delphi tool 12094429.
Can also be used for Weatherpack.

$13.3231

+ -

CRIMP TOOL-RATCHETING WEATHERPACK-#12014254

WPRCT

Weather-pack ratchet crimp tool.
Designed to crimp sealed male and female terminals and seals 20 to 14 gauge.
Core and insulation wings are crimped in a single motion.
Features two nests clearly marked with wire gauges, a safety release, and a terminal locator.
Equivalent to Delphi 12014254.

$271.5338

+ -

TOOL-TERM. EXTRACT WEATHERPACK DELPHI #12014012

WPTET

Terminal release tool.
Designed solely to depress Weather-Pack terminal retention barbs to allow terminal removal from tower or shroud.
Equivalent to Delphi tool 12014012.

$8.858

+ -

WIRE STRIPPER W/ SPRING 10-18 GA SOL./12-20 GA STRAND.

WS120T

Wire stripping tool.
Form-ground, hardened, knife-type blades for accurate stripping.
Tough steel construction.
Built-in wire cutter and wire looping holes.
Plier nose for extra gripping strength.
Laser-etched wire gauge markings.
Spring-loaded automatic opening.
Corrosion-resistant, black oxide finish.
Will strip solid copper wire 10-18 gauge.
Will strip stranded copper 12-20 gauge.

$41.3325

+ -

WIRE STRIPPER/ STRIPMASTER 10-20 GA. IDEAL

WS45092

Ideal Stripmaster wire stripper.
Knife-type blades.
Cleanly strips wire up to 7/8 inch.
One-third less hand pressure for each strip.
Eliminates nicking, cutting and fraying of wire.
Wire gripper holds wire centered in hole.
Will strip 10 to 22 gauge wire.

$78.875

+ -

CABLE CUTTER - HEAVY DUTY 22" CUTS UP TO 250 MCM COPPER

HDCC

Heavy duty cable cutter.
Cuts soft copper cable up to 250MCM (6/0 gauge).
22" handles for easier cutting.
Blades made of 1075 carbon steel, hardened for long life, can be resharpened.
Made in North America.
6 month warranty.

$176.875

+ -

CRIMP TOOL-HAMMER STYLE

HCT

Hammer style crimping tool.
Use with hammer, vise or press.
Spring loaded pin locks in “up” position for loading connector and cable.
When released pin holds connector securely during crimping.
Inexpensive, simple crimping tool.
Crimps 8 thru 4/0 gauge connectors.
Reliable and economical.

$38.4725

+ -

CRIMP TOOL-HEAVY DUTY 26" 8 GAUGE- 4/0 GAUGE

HDHC

Heavy duty 26” hand held crimper.
Adjustable rotating color coded dies help identify proper crimp setting.
Application data listed on tool.
Comfortable hand grips.
Crimps all major brands of connectors.
Crimps 8 thru 4/0 gauge.
Made in North America.

$470.625

+ -

CRIMP TOOL-RATCHETING 22-10 GAUGE HEAT SHRINK TERM.

HSRCT2

Ratcheting crimp tool.
Color code wire sizes: red 22-18 gauge, blue 16-14 gauge, yellow 12-10 gauge.
Crimps 22 through 10 gauge insulated and heat shrink terminals.
Ratcheting mechanism design.

$38.83

+ -

CRIMP TOOL-RATCHETING 22-8 GAUGE HEAT-SHRINK-TERM.

HSRCT

Release switch if terminal or wire is inserted improperly.
4 crimp nests - 8, 10-12, 14-16 and 18-22 AWG.
Alignment guide to ensure dies wont slip during crimping.
Designed for insulated connectors.
Ensures uniform crimp termination regardless of user.
High quality, economical tool.
Ratcheting crimp tool.

$151.5635

+ -

CRIMP TOOL-RATCHETING METRIPACK 150/280 SEALED

MP12085270

Weather-pack and Metri-pack crimp toool.
Used for sealed terminals.
Core and insulation wings are crimped in a separate motion.
5 marked nests and quick release.
Will clinch seals on Metri-pack 150,280,480 and 630 series.
Crimps Weather-pack and Metri-pack terminals 24-14 gauge.
Made in America.

$174.25

+ -

KLEIN HIGH LEVERAGE CABLE CUTTER

XKLN63050

Klein high-leverage cable cutter, made in the US from tool steel.
High-leverage design for exceptional cutting capability.
Precision, one-hand shearing action.
Cable-gripping shear-type jaws.
Perfect for working in confined spaces.
Hot-riveted joint ensures smooth action and no handle wobble.
Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges.
Through-hardened for longer-lasting cutting surfaces.
Maximum cable cutting capacity: 4/0 aluminum, 2/0 soft copper.

$63.825

+ -

INFRARED THERMOMETER -20 TO +1000 DEGREES

XLTX10

Contactless infrared thermometer with laser sight.
Useful in all kinds of applications such as automotive, industrial, marine, agricultural, aviation, HVAC and farming.
Performs quick measurements from a safe distance or in hard to reach places.
Temperature range of -20°s F to 1000°s F.
10:1 optical ratio.
Selectable scales:°s C/degrees F.
Laser on/off feature.
Convenient soft pouch for carrying.
Large LCD display with symbols and backlight.
Auto power off.

$104.95

+ -

PLASTIC TUBE CUTTER TOOL 1/8"- 3/8" ID

XPTC

Plastic tube cutter.
Cuts nylon and plastic tubing from 1/8" to 3/8" i.d.

$15.684

+ -

MICRO TORCH-HAND HELD MASTER/SELF-IGNITING WTH BASE

XSX2050

Butane-powered micro torch utilizing an open flame.
May be hand-held, or used "hands-free" on a flat surface, due to it’s wide, stable base.
Built-in self-igniting system with safety lock which ensures the switch is not turned on when not in use.
Built-in refillable plastic fuel tank.
Temperatures up to 2500°s F with open flame; 932°s F with hot air tip.
2 hour continuous run time.
Adjustable flame that will protect a broad, or pinpoint flame.
Use to heat materials, ignite materials, pinpoint torch, heat shrink tubing, solder and de-solder.

$64.675

+ -

HEAVY DUTY CIRCUIT TESTER 6 AND 12 VOLTS

XVSM27000

Heavy duty circuit tester.
Checks all 6 and 12 volt systems.
Tests circuits on trucks, trailers, SUV's, car, motorcycles, boats, campers and airplanes.
5 feet of heavy gauge wire.
Spring supported strain relief.
Heavy duty ground clip and insulator.
Impact and chemical-resistant housing.

$29.0675

+ -

KNIPEX STEPCUT CABLE SHEARS 6 1/4"

SCCS614

Innovative step cutting separates and cuts one by one
Cuts multi-core stranded copper and aluminum cables, single and multi-stranded wire up to 1/0 AWG
Easy one-hand operation
Pinch guard prevents operators from being pinched
6-1/4” overall length

$69.00

+ -