Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
AUVECO KLAMP-TITE RIVET 50 CT
- Klamp-tite rivets
- Structural, self plugging
- Head style - protruding
- 3/16" diameter
- grip range 3/8" to 9/16"
AUVECO NYLON 1/4" FLAT WASHERS 100/BOX
- NYLON FLAT WASHER 1/4 BOLT .281 ID .030 THICK
- Inner Diameter : 0.266-0.296"
- Outer Diameter : 0.485-0.515"
- Thickness : 0.029-0.031"
- Material : Natural Nylon
LOCK NUT NYLON INSERT ZINC M8-1.25 CL 8
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Class 8.
- Designed to be used in structural application with class 8.8 or less cap screws or bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts..
- Made from low carbon steel.
- Size: M8-1.25.
- Zinc plated.
$0.422
SS TEK SCREW HEX WASHER HD #14 X 1-1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$1.6237
TEK SCREW FLAT HEAD PHILLIPS #8 X 3/4"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$0.5368
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-1/2" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.7427
RIVET NUT M6-1.0 STEEL, RIBBED, LOW PROFILE, LARGE FLANGE, GRIP .027-.165
- L Style Round Body Splined Rivetnut
- Zinc Yellow Trivalent Chromate
- Large Flange
- Ribbed external body for increased torque out resistance.
- May install with all pneumatic and manual rivet nut tools.
$0.6256
LOCK NUT NYLON UNF ZINC 3/8"-24 GR 8
- Hex nut with a nylon-filled collar at its back end
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used in structural application with Grade 8 cap screws or bolts
- Applications include engines, turbines, hydraulic cylinders, railroads and aerospace
- Nylon inserts nuts are not designed to be used at temperatures over 250° F
- Made from heat treated steel
- Proof load: 150,000 psi
- Size: 3/8"-24
- Yellow zinc plated
$0.8414
HEX CAP SCREW BOLT METRIC ZINC M4-.70 X 16, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M4-.70.
- Length: 16 mm.
$0.2324
HEX CAP SCREW BOLT UNC ZINC 1"-8 X 5", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 1"-8.
- Length: 5".
$17.25
RIVET, SHAVER HEAD, OLYMPIC, ALL STEEL, 1/4" GRIP .250-.500
- Bulb Tite Blind Rivet
- Steel Body/Steel Mandrel
- Low profile dome head W/Washer
- Grip Range .250-.500
- High-strength structural tri-folding blind rivets
HELICALLY COILED INSERT KIT M6 X 1.00
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M6 X 1.00
- Drill size: 1/4