Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
SOCKET HEAD CAPSCREW PLAIN M4-0.70 X 12
- Plain finish
- Socket head capscrew
- M4 - 0.70 X 12
$0.224
FLAT HEAD MACHINE SCREW, PHILLIPS, #8 X 3/8", STAINLESS
- #8 X 3/8"
- Phillips flat head sheet metal screw
- Stainless
$0.40
KEP NUT UNC ZINC #4-40
- Keps Nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation
$0.3588
BLACK NYLON LIC. PLATE SCREW & NUT 1/4-20 X 5/8
- Black nylon license plate screw & Nut
- Slotted truss head
- Washer head diameter 19/32"
- 1/4"-20X 5/8"
SHEET METAL SCREW PHIL PAN HD #10 X 1-1/4" BLACK
- Phillips pan head sheet metal screw
- #10 X 1-1/4"
- Black finish
$1.1025
FENDER WASHER ZINC HEAVY DUTY 3/8" X 1-3/4" .108 THICK
- Flat washer with more surface area than a USS or SAE washer
- Made from heavier gauge metal than most flat washers
- Used where an extra wide bearing surface is required
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel
- Inside diameter 3/8"
- Outside diameter 1-1/2"
$3.279
TEK SCREW PHILLIPS PAN HEAD #10 X 5/8"
- #10 X 5/8"
- Phillips pan head tek screw
$0.3696
METRIC MACH. SCREW PHILLIPS PAN HD M8-1.25 X 40
- Metric Machine Screw Phillips Pan Head
- M8-1.25 Thread
- 40 MM length
$0.504
SS TEK SCREW PHILLIPS PAN HEAD #6 X 1/2"
- #6 X 1/2"
- Stainless steel Phillips pan head tek screw
$0.30
ROLL PIN - PLAIN FINISH 5/64" X 3/4"
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation
- Used as locking devices, positioning points, anti-chafing surfaces, shaft or sleeves for wiring
- Carbon steel, plain finish material
- Diameter is 5/16"
- Length is 4-3/4"
$0.2012
CUP-POINT SOCKET SET-SCREW #10-24 X 3/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #10-24
- Length: 3/4"
$0.4279
MACHINE SCREW PHILLIPS PAN HD #10-24 X 1/2"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 10-24 diameter.
- Length of 1/2".
$0.192
WOOD SCREW PHILLIPS FLAT HEAD #10 X 2-1/2"
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 10
- Length: 2-1/2"
$0.4816
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1-1/2"
$0.3144
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 4-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 4-1/2".
$4.6312
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 4", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 4".
$2.3247
HEX CAP SCREW BOLT UNF ZINC 1/2"-20 X 5-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 1/2"-20.
- Length: 5-1/2".
$4.2984
CUP-POINT SOCKET SET-SCREW 1/4"-20 X 3/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: 1/4-20"
- Length: 3/4"
$0.482
MACHINE SCREW SLOT TRUSS HEAD 1/4"-20 X 1/2"
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- The truss head has a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same size.
- Made from AISI 1006-1022 or equivalent steel.
- Zinc plated.
- 1/4-20 diameter.
- Length of 1/2".
- Preferred in applications where minimal clearance exists above the head.
- Truss screws provide a trim, finished assembly appearance.
- Widely used as license plates screws.
$0.2295