Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
MACHINE SCREW PHIL PAN HD #4-40 X 1/4" STAINLESS
- Machine Screw
- Phillips Drive
- Pan Head
- 18-8 Stainless Steel
- #4-40 X 1/4"
$0.194
MACHINE SCREW PHIL PAN HD #4-40 X 3/8" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
$0.40
FINISH WASHER COUNTER-SUNK #12
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
$0.2712
FINISH WASHER COUNTER-SUNK #10
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
$0.2712
SHEET METAL SCREW PHIL PAN HD #14 X 3/4" STAINLESS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
$0.4784
METAL SCREW TRUSS HEAD PHILLIPS #14 X 3/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$0.2844
TEK SCREW HEX WASHER HD #14 X 3/4" STAINLESS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$0.9373
HEX CAP SCREW BOLT METRIC ZINC M14-2.00 X 35 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M14-2.00.
- Length: 35 mm.
$1.8748
CARRIAGE BOLT UNC ZINC 1/4"-20 X 3 GR A
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 1/4"-20.
- Length: 3".
$0.2408
TEK SCREW HEX WASHER HD 1/4" X 3"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 14
- Length: 3"
$0.552
HEX CAP SCREW BOLT METRIC ZINC M14-2.00 X 40 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M14-2.00.
- Length: 40 mm.
$2.2635
HEX CAP SCREW BOLT METRIC ZINC M14-2.00 X 45 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M14-2.00.
- Length: 45 mm.
$2.3486
HEX CAP SCREW BOLT METRIC ZINC M14-2.00 X 50 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M14-2.00.
- Length: 50 mm.
$2.3711