Chemicals & Paint
Complete Solutions for Bonding, Sealing, Lubricating, Cleaning, Protecting & Finishing
Discover a comprehensive selection of industrial chemicals and paint designed to meet the rigorous demands of MRO across industrial, fleet, and facility environments. Our portfolio delivers application-specific solutions for bonding, sealing, lubricating, cleaning, protecting, and finishing - helping you maximize equipment reliability and reduce downtime.
Adhesives, Thread Lockers & Bonding Products
Achieve secure, lasting assemblies with our range of adhesives, thread lockers, and bonding agents. Whether you need high-strength epoxies, instant adhesives, or specialty thread lockers, our products are engineered for demanding industrial and fleet applications.
Sealants, Silicones & Gasket Makers
Prevent leaks and ensure robust seals with our selection of industrial sealants, silicones, and gasket makers. Formulated for chemical resistance and durability across electrical, mechanical, and facility maintenance.
Lubricants, Greases & Anti-Seize
Protect moving parts and extend equipment life with lubricants, greases, and anti-seize compounds. Reduce friction, prevent corrosion, and minimize maintenance costs with solutions tailored for high-load and high-temperature applications.
Industrial Cleaners & Safety Solutions
Maintain a safe, compliant workplace with our industrial cleaners and safety products. From degreasers to spill control and PPE.
Paints, Coatings & Surface Protection
Enhance and protect surfaces with industrial paints, coatings, and surface protection solutions. Choose from corrosion-resistant coatings, marking paints, and specialty finishes.
Why Choose Our Industrial Chemicals & Paint?
- Application-Specific Formulations: Products engineered for the unique needs of industrial, fleet, and facility MRO.
- Improved Equipment Reliability: Reduce unplanned downtime and extend asset lifespan with proven solutions.
- Lower Maintenance Costs: Minimize repairs and labor with high-performance, long-lasting products.
- Versatile Use: Suitable for electrical, mechanical, fleet, and facility maintenance tasks.
- Compliance-Focused Safety: Select from a range of spill control and safety products designed to meet regulatory standards.
GASKET SEALANT - SPRAY ON NET WT 9 OZ, AEROSOL
- Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film
- Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C).
- Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane
- Suitable for all vehicles including EV
- Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber
JB WELD KWIK STEEL
- 2 - 1 oz tubes
- Dark Grey
- Will bond o virtually any clean, dry surface
- Stress Resistance [Nom] 7320 psi
- Temp. Range [Max] 550 degrees F
- Tensil Strength (Nom) 3960 psi
JOE'S HAND CLEANER, 14 OZ SQUEEZE TUBE
- All Purpose Waterless Hand Cleaner
- Banana Scent
$15.5448
KO WASH & WAX, 5-GALLON
- The wash and wax uses advanced cleaning agents and waxes that work together to remove soils and shine.
- Economical product with pleasant fruit scent
- Great for lot maintenance, as it contains water-sheeting wax that makes for a spot-free finish.
- Dilution rate 1:64
SPRAY PAINT-KRYLON NET WT 12 OZ, ULTIMATE FLAT BLACK
- Specially formulated paints for industrial maintenance and touch-up applications.
- Indoor/outdoor.
- Krylon paints provide high solids, fast drying times, and excellent appearance.
- No run, no drips, no errors.
- The most asked-for spray paint in the industrial marketplace.
- Superior performance, indoors and outdoors.
- Hard, protective, durable finish.
- Dries fast, in just 10 minutes to the touch.
- Uniform coverage.
- Color: flat black
$22.3875
GLASS CLEANER TOWELETTES 100 PER BOX
- Premoistened towelettes are safe to use on plastic, polycarbonate and glass lenses
- Safe and effective with all types of lens coatings
- Ideal for glasses, goggles, face shields, and computer screens
- Anti-fog, anti-static formula; contains no silicone
LOCTITE 518 FLANGE SEALANT 50 ML TUBE
- Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces.
- Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock
- Fills gaps up to 0.050" (1.27 mm) and forms a flexible, solvent-resistant seal that will not tear or decay
- Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife
- APPLICATIONS. Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement
$29.85
LOCTITE SUPER GLUE 3 GRAM
- 1.0 ounces (3 grams)
- Instantly bonds metals, plastics and elastomers.
- Bonds porous or absorbent materials such as wood, paper, leather and fabric, easy-to-use, requires no mixing, low viscosity.
$17.937
LOCTITE METAL BONDING ADHESIVE 1 OUNCE
- Instant adhesive 1 oz Clear
- Multipurpose
- Most metals, plastic and rubber
- Fix cure time and Temp 30 Seconds @ 77 degrees
- Full cure time and Temp 24 Hours @ 77 degrees
LOCTITE 495 SUPER BONDER 1OZ INSTANT ADHESIVE
- Multi-Purpose
- Ensure a super-strong bond, with super bonder, designed to bond rubber, metal, and plastic parts
- Cures rapidly at room temperature without the need for heat or light.
- Easy to dispense and use
- Bonds gaps up to .004"
- Applicable materials include plastic, most metals and rubber.
- 1 oz bottle
LOCTITE 545 THREAD SEALANT 50ML
- Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System
- Pipe thread sealant designed for locking and sealing of metal pipes and fittings
- Excellent solvent resistance
- Contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens
- High lubricity for easy assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general
LOCTITE PIPE SEALANT W/PTFE 50 ML
- High temperature thread sealant.
- Medium strength anaerobic sealant with PTFE for tapered pipe threads.
- The high lubricating properties of this compound prevents galling on pipe threads and fittings.
- Provides immediate low pressure sealing and allow for the readjustment of fittings shortly after assembly.
- Will withstand temperatures up to 400°F.
- It is not recommended for use on plastic piping.
- Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels.
- Parts may be repositioned for up to 24 hours after application.
- 50 ml. tube.
HAND CLEANER-POWER SCRUB BLUE 1 GALLON, FLAT TOP
- Liquid hand cleaner that removes ground in dirt, grease and grime
- Sperical micro-scrubbers are added to gently penetrate and clean hands
- Contains no solvents that would dry, crack, whiten or harm sensitive skin
- 1 gallon flat top lid
$29.70
HAND CLEANER-RAM GRIT 1 GAL, FLAT TOP, REQUIRES HP-2
- Heavy duty hand cleaner effective for removing the toughest soils.
- Contains pumice to remove grease, inks, tar, asphalt, oils, lubricants, paints, industrial carbon and more.
- Conditions while cleaning.
- Pleasant cherry scent.
- Deep cleaning.
- Use with or without water.
- No petroleum odor.
- For use by printing shops, industrial plants, oilfields, maintenance shops, machine shops, auto shops and more.
- 1-gallon flat-top jug.
$40.15
MARVEL MYSTERY AIR TOOL OIL 4 OZ SQUEEZE BOTTLE
- Marvel Mystery air tool oil.
- 4 ounce container.
- Specially formulated tool oil for use in all piston type and rotary air tools.
- Prevents rust formation in air tools while providing positive lubrication for smoother starting, longer lasting tools.
- Assures the maximum performance of your tools by dissolving gum and sludge that reduce tools speed and power.
$8.16
MARVEL MYSTERY AIR TOOL OIL QUART
- Marvel Mystery air tool oil.
- One quart container.
- Specially formulated tool oil for use in all piston type and rotary air tools.
- Prevents rust formation in air tools while providing positive lubrication for smoother starting, longer lasting tools.
- Assures the maximum performance of your tools by dissolving gum and sludge that reduce tools speed and power.
K&W COPPER COAT SPRAY 9 OZ.
- Prevents compression loss on premium gaskets.
- Ideal for head and intake gaskets.
- Applications include transmissions, cover plates, diesel heads, high compression engines and hydraulic pumps.
- Net weight 9 ounces